paulwong

利用Mongodb的复制集搭建高可用分片,Replica Sets + Sharding的搭建过程

参考资料 reference:  http://mongodb.blog.51cto.com/1071559/740131  http://docs.mongodb.org/manual/tutorial/deploy-shard-cluster/#sharding-setup-shard-collection

感谢网友Mr.Sharp,他给了我很多很有用的建议。

概念梳理
Sharded cluster has the following components: shards, query routers and config servers.

Shards A : 
A shard is a MongoDB instance that holds a subset of a collection’s data. Each shard is either a single
mongod instance or a replica set. In production, all shards are replica sets.

Config Servers Each :
config server (page 10) is a mongod instance that holds metadata about the cluster. The metadata
maps chunks to shards. For more information, see Config Servers (page 10).

Routing Instances :
Each router is a mongos instance that routes the reads and writes from applications to the shards.
Applications do not access the shards directly.

Sharding is the only solution for some classes of deployments. Use sharded clusters if:
1 your data set approaches or exceeds the storage capacity of a single MongoDB instance.
2 the size of your system’s active working set will soon exceed the capacity of your system’s maximum RAM.
3 a single MongoDB instance cannot meet the demands of your write operations, and all other approaches have
not reduced contention.

 

 

开始部署搭建

Deploy a Sharded Cluster
1 Start the Config Server Database Instances?
 1.1 create data directories for each of the three config server instances
 mkdir -p /opt/data/configdb


 1.2 Start the three config server instances. Start each by issuing a command using the following syntax:

 ignore thisdo it later

 1.3 config file
 [root@472322 configdb]# vim /etc/mongodb/37018.conf 
 # This is an example config file for MongoDB
 dbpath = /opt/data/configdb2
 port = 37018
 rest = true
 fork = true
 logpath = /var/log/mongodb12.log
 logappend = true
 directoryperdb = true
 configsvr = true

 [root@472322 configdb]# vim /etc/mongodb/37017.conf 
 # This is an example config file for MongoDB
 dbpath = /opt/data/configdb1
 port = 37017
 rest = true
 fork = true
 logpath = /var/log/mongodb12.log
 logappend = true
 directoryperdb = true
 configsvr = true

  [root@472322 configdb]# vim /etc/mongodb/37019.conf 
 # This is an example config file for MongoDB
 dbpath = /opt/data/configdb3
 port = 37019
 rest = true
 fork = true
 logpath = /var/log/mongodb13.log
 logappend = true
 directoryperdb = true
 configsvr = true


 1.4 start mongodb server
 /db/mongodb/bin/mongod -f /etc/mongodb/37019.conf
 /db/mongodb/bin/mongod -f /etc/mongodb/37018.conf
 /db/mongodb/bin/mongod -f /etc/mongodb/37017.conf

 

2 Start the mongos Instances
 The mongos instances are lightweight and do not require data directories. You can run a mongos instance on a system that runs other cluster components,
 such as on an application server or a server running a mongod process. By default, a mongos instance runs on port 27017.
 /db/mongodb/bin/mongos --configdb 20.10x.91.119:37017,20.10x.91.119:37018,20.10x.91.119:37019
 or run " nohup /db/mongodb/bin/mongos --configdb 20.10x.91.119:37017,20.10x.91.119:37018,20.10x.91.119:37019 & "
 
 2.1 start mongos on default port 27017
 [root@472322 ~]# nohup /db/mongodb/bin/mongos --configdb 20.10x.91.119:37017,20.10x.91.119:37018,20.10x.91.119:37019 &
 Tue Aug  6 07:40:09 /db/mongodb/bin/mongos db version v2.0.1, pdfile version 4.5 starting (--help for usage)
 Tue Aug  6 07:40:09 git version: 3a5cf0e2134a830d38d2d1aae7e88cac31bdd684
 Tue Aug  6 07:40:09 build info: Linux bs-linux64.10gen.cc 2.6.21.7-2.ec2.v1.2.fc8xen #1 SMP Fri Nov 20 17:48:28 EST 2009 x86_64 BOOST_LIB_VERSION=1_41
 Tue Aug  6 07:40:09 SyncClusterConnection connecting to [20.10x.91.119:37017]
 Tue Aug  6 07:40:09 SyncClusterConnection connecting to [20.10x.91.119:37018]
 Tue Aug  6 07:40:09 SyncClusterConnection connecting to [20.10x.91.119:37019]
 Tue Aug  6 07:40:09 [Balancer] about to contact config servers and shards
 Tue Aug  6 07:40:09 [websvr] admin web console waiting for connections on port 28017
 Tue Aug  6 07:40:09 [Balancer] SyncClusterConnection connecting to [20.10x.91.119:37017]
 Tue Aug  6 07:40:09 [mongosMain] waiting for connections on port 27017
 Tue Aug  6 07:40:09 [Balancer] SyncClusterConnection connecting to [20.10x.91.119:37018]
 Tue Aug  6 07:40:09 [Balancer] SyncClusterConnection connecting to [20.10x.91.119:37019]
 Tue Aug  6 07:40:09 [Balancer] config servers and shards contacted successfully
 Tue Aug  6 07:40:09 [Balancer] balancer id: 472322.ea.com:27017 started at Aug  6 07:40:09
 Tue Aug  6 07:40:09 [Balancer] created new distributed lock for balancer on 20.10x.91.119:37017,20.10x.91.119:37018,20.10x.91.119:37019 ( lock timeout : 900000, ping interval : 30000, process : 0 )
 Tue Aug  6 07:40:09 [Balancer] SyncClusterConnection connecting to [20.10x.91.119:37017]
 Tue Aug  6 07:40:09 [Balancer] SyncClusterConnection connecting to [20.10x.91.119:37018]
 Tue Aug  6 07:40:09 [Balancer] SyncClusterConnection connecting to [20.10x.91.119:37019]
 Tue Aug  6 07:40:09 [Balancer] SyncClusterConnection connecting to [20.10x.91.119:37017]
 Tue Aug  6 07:40:09 [Balancer] SyncClusterConnection connecting to [20.10x.91.119:37018]
 Tue Aug  6 07:40:09 [Balancer] SyncClusterConnection connecting to [20.10x.91.119:37019]
 Tue Aug  6 07:40:09 [LockPinger] creating distributed lock ping thread for 20.10x.91.119:37017,20.10x.91.119:37018,20.10x.91.119:37019 and process 472322.ea.com:27017:1375774809:1804289383 (sleeping for 30000ms)
 Tue Aug  6 07:40:10 [Balancer] distributed lock 'balancer/472322.ea.com:27017:1375774809:1804289383' acquired, ts : 5200a8598caa3e21e9888bd3
 Tue Aug  6 07:40:10 [Balancer] distributed lock 'balancer/472322.ea.com:27017:1375774809:1804289383' unlocked.

 Tue Aug  6 07:40:20 [Balancer] distributed lock 'balancer/472322.ea.com:27017:1375774809:1804289383' acquired, ts : 5200a8648caa3e21e9888bd4
 Tue Aug  6 07:40:20 [Balancer] distributed lock 'balancer/472322.ea.com:27017:1375774809:1804289383' unlocked.
 Tue Aug  6 07:40:30 [Balancer] distributed lock 'balancer/472322.ea.com:27017:1375774809:1804289383' acquired, ts : 5200a86e8caa3e21e9888bd5
 Tue Aug  6 07:40:30 [Balancer] distributed lock 'balancer/472322.ea.com:27017:1375774809:1804289383' unlocked.
 Tue Aug  6 07:40:40 [Balancer] distributed lock 'balancer/472322.ea.com:27017:1375774809:1804289383' acquired, ts : 5200a8788caa3e21e9888bd6
 Tue Aug  6 07:40:40 [Balancer] distributed lock 'balancer/472322.ea.com:27017:1375774809:1804289383' unlocked.

 2.2 start others mongos in appointed port 27018,27019
 nohup /db/mongodb/bin/mongos --configdb 20.10x.91.119:37017,20.10x.91.119:37018,20.10x.91.119:37019 --port 27018 --chunkSize 1 --logpath /var/log/mongos2.log --fork &
 nohup /db/mongodb/bin/mongos --configdb 20.10x.91.119:37017,20.10x.91.119:37018,20.10x.91.119:37019 --port 27019 --chunkSize 1 --logpath /var/log/mongos3.log --fork &

 

3 [root@472322 ~]# /db/mongodb/bin/mongo --host 20.10x.91.119 --port 27017
   the replica sets have not been created, so do it soon.

 

4 prepare the replica sets
 4.1 the first sets
 4.1.1 create the data directory
 mkdir -p /opt/db/mongodb-data/db37
 mkdir -p /opt/db/mongodb-data/db38 
 mkdir -p /opt/db/mongodb-data/db39 
 
 4.1.2 set the config files 27037.conf
 [root@472322 mongodb]# vi  27037.conf
 dbpath =/opt/db/mongodb-data/db37
 port = 27037
 rest = true
 fork = true
 logpath = /var/log/mongodb37.log
 logappend = true
 replSet = rpl
 #diaglog = 3
 profile = 3
 slowms=50
 oplogSize=4000
 
 4.1.3 set the config files 27039.conf
 [root@472322 mongodb]#  vi  27039.conf
 # This is an example config file for MongoDB
 dbpath =/opt/db/mongodb-data/db39
 port = 27039
 rest = true
 fork = true
 logpath = /var/log/mongodb39.log
 logappend = true
 replSet = rpl
 #diaglog = 3
 profile = 3
 slowms=50
 oplogSize=4000 
 
 4.1.4 set the config files 27038.conf 
 [root@472322 mongodb]#  vi  27038.conf
 # This is an example config file for MongoDB
 dbpath =/opt/db/mongodb-data/db38
 port = 27038
 rest = true
 fork = true
 logpath = /var/log/mongodb38.log
 logappend = true
 replSet = rpl
 #diaglog = 3
 profile = 3
 slowms=50
 oplogSize=4000 
 
 4.1.5 start replica set
 config = {_id: 'rpl1', members: [
   {_id: 0, host: '127.0.0.1:27027'},
   {_id: 1, host: '127.0.0.1:27028'},
   {_id: 3, host: '127.0.0.1:27029', arbiterOnly: true}
  ]};
  > config = {_id: 'rpl1', members: [
  ... {_id: 0, host: '127.0.0.1:27027'},
  ... {_id: 1, host: '127.0.0.1:27028'},
  ... {_id: 3, host: '127.0.0.1:27029', arbiterOnly: true}
  ... ]};
  {
    "_id" : "rpl1",
    "members" : [
      {
        "_id" : 0,
        "host" : "127.0.0.1:27027"
      },
      {
        "_id" : 1,
        "host" : "127.0.0.1:27028"
      },
      {
        "_id" : 3,
        "host" : "127.0.0.1:27029",
        "arbiterOnly" : true
      }
    ]
  }

  rs.initiate(config);
  > rs.initiate(config);
  {
    "info" : "Config now saved locally.  Should come online in about a minute.",
    "ok" : 1
  }
  rs.status();
  PRIMARY> rs.status();
  {
    "set" : "rpl1",
    "date" : ISODate("2013-08-06T09:18:39Z"),
    "myState" : 1,
    "members" : [
      {
        "_id" : 0,
        "name" : "127.0.0.1:27027",
        "health" : 1,
        "state" : 1,
        "stateStr" : "PRIMARY",
        "optime" : {
          "t" : 1375780672000,
          "i" : 1
        },
        "optimeDate" : ISODate("2013-08-06T09:17:52Z"),
        "self" : true
      },
      {
        "_id" : 1,
        "name" : "127.0.0.1:27028",
        "health" : 1,
        "state" : 2,
        "stateStr" : "SECONDARY",
        "uptime" : 29,
        "optime" : {
          "t" : 1375780672000,
          "i" : 1
        },
        "optimeDate" : ISODate("2013-08-06T09:17:52Z"),
        "lastHeartbeat" : ISODate("2013-08-06T09:18:38Z"),
        "pingMs" : 0
      },
      {
        "_id" : 3,
        "name" : "127.0.0.1:27029",
        "health" : 1,
        "state" : 7,
        "stateStr" : "ARBITER",
        "uptime" : 31,
        "optime" : {
          "t" : 0,
          "i" : 0
        },
        "optimeDate" : ISODate("1970-01-01T00:00:00Z"),
        "lastHeartbeat" : ISODate("2013-08-06T09:18:38Z"),
        "pingMs" : 0
      }
    ],
    "ok" : 1
  }

 
 4.2 the second sets
 do the same to 4.1 in 27037,27038,27039 ports
  config = {_id: 'rpl2', members: [
   {_id: 0, host: '127.0.0.1:27037'},
   {_id: 1, host: '127.0.0.1:27038'},
   {_id: 3, host: '127.0.0.1:27039', arbiterOnly: true}
  ]};
  rs.initiate(config);
  rs.status();

 

5 Add Shards to the Cluster
 A shard can be a standalone mongod or a replica set. In a production environment, each shard should be a replica set.
 5.1 From a mongo shell, connect to the mongos instance. Issue a command using the following syntax:
 [root@472322 mongodb]# /db/mongodb/bin/mongo --host 20.10x.91.119 --port 27017
 MongoDB shell version: 2.0.1
 connecting to: 20.10x.91.119:27017/test
 mongos> 
    
 5.2  add the replica rpl1 into shards
 sh.addShard( "rpl1/127.0.0.1:27027" );
 mongos> sh.addShard( "rpl1/127.0.0.1:27027" );
 command failed: {
   "ok" : 0,
   "errmsg" : "can't use localhost as a shard since all shards need to communicate. either use all shards and configdbs in localhost or all in actual IPs  host: 127.0.0.1:27027 isLocalHost:1"
 }
 Tue Aug  6 09:41:16 uncaught exception: error { "$err" : "can't find a shard to put new db on", "code" : 10185 }
 mongos> 
 can't use the localhost or 127.0.0.1, so change to the real ip address of "20.10x.91.119".
 mongos> sh.addShard( "rpl1/20.10x.91.119:27027" );
 command failed: {
   "ok" : 0,
   "errmsg" : "in seed list rpl1/20.10x.91.119:27027, host 20.10x.91.119:27027 does not belong to replica set rpl1"
 }
 Tue Aug  6 09:42:26 uncaught exception: error { "$err" : "can't find a shard to put new db on", "code" : 10185 }
 mongos> 
 sh.addShard( "rpl1/20.10x.91.119:27027,20.10x.91.119:27028,20.10x.91.119:27029" );
 
 so, replica sets config 127.0.0.1, 20.10x.91.119 can't be recognized,it is wrong. i should config it again.
 
 5.2.1 delete all db files, then restart mongodb, then config again
  
  config = {_id: 'rpl1', members: [
   {_id: 0, host: '20.10x.91.119:27027'},
   {_id: 1, host: '20.10x.91.119:27028'},
   {_id: 3, host: '20.10x.91.119:27029', arbiterOnly: true}
   ]};
  rs.initiate(config);
  rs.status();
  
  config = {_id: 'rpl2', members: [
   {_id: 0, host: '20.10x.91.119:27037'},
   {_id: 1, host: '20.10x.91.119:27038'},
   {_id: 3, host: '20.10x.91.119:27039', arbiterOnly: true}
   ]};
  rs.initiate(config);
  rs.status();
 
 5.2.2 add replica sets to shards again, it is ok.
 [root@472322 ~]# /db/mongodb/bin/mongo --host 20.10x.91.119 --port 27017
 MongoDB shell version: 2.0.1
 connecting to: 20.10x.91.119:27017/test
 mongos> sh.addShard( "rpl1/20.10x.91.119:27027,20.10x.91.119:27028,20.10x.91.119:27029" );
 mongos>

 

6 Enable Sharding for a Database
 Before you can shard a collection, you must enable sharding for the collection’s database.
 Enabling sharding for a database does not redistribute data but make it possible to shard the collections in that database.
   6.1 1.From a mongo shell, connect to the mongos instance. Issue a command using the following syntax:
 sh.enableSharding("<database>")

   6.2 Optionally, you can enable sharding for a database using the enableSharding command, which uses the following syntax:
 db.runCommand( { enableSharding: <database> } )

 

7  Convert a Replica Set to a Replicated Sharded Cluster
 简介梳理The procedure, from a high level, is as follows:
 7.1.Create or select a 3-member replica set and insert some data into a collection. done
 7.2.Start the config databases and create a cluster with a single shard.  done.
 7.3.Create a second replica set with three new mongod instances.  done
 7.4.Add the second replica set as a shard in the cluster. haven't
 7.5.Enable sharding on the desired collection or collections. haven't

  开始操作
 7.2 Add the second replica set as a shard in the cluster.
 sh.addShard( "rpl2/20.10x.91.119:27037,20.10x.91.119:27038,20.10x.91.119:27039" );
 it is okay.
 
 7.3  Verify that both shards are properly configured by running the listShards command.
 mongos> use admin
 switched to db admin
 mongos> db.runCommand({listShards:1})
 {
   "shards" : [
     {
       "_id" : "rpl1",
       "host" : "rpl1/20.10x.91.119:27027,20.10x.91.119:27028,20.10x.91.119:27029"
     },
     {
       "_id" : "rpl2",
       "host" : "rpl2/20.10x.91.119:27037,20.10x.91.119:27038,20.10x.91.119:27039"
     }
   ],
   "ok" : 1
 }
 mongos> 
 
 7.4 insert into 1000,000 data to test.tickets,and shared the tickets collections.
 mongos> db.runCommand( { enableSharding : "test" } );
 { "ok" : 1 }
 mongos> use admin
 mongos> db.runCommand( { shardCollection : "test.tickets", key : {"number":1} });
 {
   "proposedKey" : {
     "number" : 1
   },
   "curIndexes" : [
     {
       "v" : 1,
       "key" : {
         "_id" : 1
       },
       "ns" : "test.tickets",
       "name" : "_id_"
     }
   ],
   "ok" : 0,
   "errmsg" : "please create an index over the sharding key before sharding."
 }
 mongos> 
 if enable index to share, must create index first.
 db.tickets.ensureIndex({ip:1});
 db.runCommand( { shardCollection : "test.tickets", key : {"ip":1} })
 
 mongos> db.runCommand( { shardCollection : "test.tickets", key : {"ip":1} })
 { "collectionsharded" : "test.tickets", "ok" : 1 }
 mongos> 
 The collection tickets is now sharded!
 
 7.5 check in mongos
 use test;
 db.stats();
 db.printShardingStatus();
 there is no data chunks in rpl2,so sharedCollection is error.
 
 
 7.6 i decided to add the second shared again, first remove,and then add.
 7.6.1 Use the listShards command, as in the following:
 db.adminCommand( { listShards: 1 } );
 get the share name
 
 7.6.2 Remove Chunks from the Shard
 db.runCommand( { removeShard: "rpl2" } );
 mongos> use admin
 switched to db admin
 mongos> db.runCommand( { removeShard: "rpl2" } );
 {
   "msg" : "draining started successfully",
   "state" : "started",
   "shard" : "rpl2",
   "ok" : 1
 }
 mongos> 
 
 check
 db.adminCommand( { listShards: 1 } ); it  is ok. when i insert data for tickets in mongo 27027 of first shard, the data can't be switched to the second shard.
 why ? i asked for HYG, he told me that we must insert data in mongos windown,if not ,the data can't be switched,so i will try to do it soon.
 
 7.7 insert data in mongos command window
 db.tc2.ensureIndex({xx:1});
 db.runCommand( { shardCollection : "test.tc2", key : {"xx":1} })
 for( var i = 1; i < 2000000; i++ ) db.tc2.insert({ "xx":i, "fapp" : "84eb9fb556074d6481e31915ac2427f0",  "dne" : "ueeDEhIB6tmP4cfY43NwWvAenzKWx19znmbheAuBl4j39U8uFXS1QGi2GCMHO7L21szgeF6Iquqmnw8kfJbvZUs/11RyxcoRm+otbUJyPPxFkevzv4SrI3kGxczG6Lsd19NBpyskaElCTtVKxwvQyBNgciXYq6cO/8ntV2C6cwQ=",  "eml" : "q5x68h3qyVBqp3ollJrY3XEkXECjPEncXhbJjga+3hYoa4zYNhrNmBN91meL3o7jsBI/N6qe2bb2BOnOJNAnBMDzhNmPqJKG/ZVLfT9jpNkUD/pQ4oJENMv72L2GZoiyym2IFT+oT3N0KFhcv08b9ke9tm2EHTGcBsGg1R40Ah+Y/5z89OI4ERmI/48qjvaw",  "uid" : "sQt92NUPr3CpCVnbpotU2lqRNVfZD6k/9TGW62UT7ExZYF8Dp1cWIVQoYNQVyFRLkxjmCoa8m6DiLiL/fPdG1k7WYGUH4ueXXK2yfVn/AGUk3pQbIuh7nFbqZCrAQtEY7gU0aIGC4sotAE8kghvCa5qWnSX0SWTViAE/esaWORo=",  "agt" : "PHP/eaSSOPlugin",  "sd" : "S15345853557133877",  "pt" : 3795,  "ip" : "211.223.160.34",  "av" : "http://secure.download.dm.origin.com/production/avatar/prod/1/599/40x40.JPEG",  "nex" : ISODate("2013-01-18T04:00:32.41Z"),  "exy" : ISODate("2013-01-18T01:16:32.015Z"),  "chk" : "sso4648609868740971",  "aid" : "Ciyvab0tregdVsBtboIpeChe4G6uzC1v5_-SIxmvSLLINJClUkXJhNvWkSUnajzi8xsv1DGYm0D3V46LLFI-61TVro9-HrZwyRwyTf9NwYIyentrgAY_qhs8fh7unyfB",  "tid" : "rUqFhONysi0yA==13583853927872",  "date" : ISODate("2012-02-17T01:16:32.787Z"),  "v" : "2.0.0",  "scope" : [],  "rug" : false,  "schk" : true,  "fjs" : false,  "sites" : [{      "name" : "Origin.com",      "id" : "nb09xrt8384147bba27c2f12e112o8k9",      "last" : ISODate("2013-01-17T01:16:32.787Z"),      "_id" : ObjectId("50f750f06a56028661000f20")    }]});
 
 watch the status of sharding, use the command of "db.printShardingStatus();"
 mongos> db.printShardingStatus();
 --- Sharding Status --- 
   sharding version: { "_id" : 1, "version" : 3 }
   shards:
   {  "_id" : "rpl1",  "host" : "rpl1/20.10x.91.119:27027,20.10x.91.119:27028" }
   {  "_id" : "rpl2",  "host" : "rpl2/20.10x.91.119:27037,20.10x.91.119:27038" }
   databases:
   {  "_id" : "admin",  "partitioned" : false,  "primary" : "config" }
   {  "_id" : "test",  "partitioned" : true,  "primary" : "rpl1" }
     test.tc chunks:
         rpl1    1
       { "ip" : { $minKey : 1 } } -->> { "ip" : { $maxKey : 1 } } on : rpl1 { "t" : 1000, "i" : 0 }
     test.tc2 chunks:
         rpl1    62
         rpl2    61
       too many chunks to print, use verbose if you want to force print
     test.tickets chunks:
         rpl1    1
       { "ip" : { $minKey : 1 } } -->> { "ip" : { $maxKey : 1 } } on : rpl1 { "t" : 1000, "i" : 0 }
   {  "_id" : "adin",  "partitioned" : false,  "primary" : "rpl1" }

 mongos> 
 
 if we want to see the detail of "too many chunks to print, use verbose if you want to force print",we should use the parameter vvvv.
 db.printShardingStatus("vvvv");
 mongos> db.printShardingStatus("vvvv")
 --- Sharding Status --- 
   sharding version: { "_id" : 1, "version" : 3 }
   shards:
   {  "_id" : "rpl1",  "host" : "rpl1/20.10x.91.119:27027,20.10x.91.119:27028" }
   {  "_id" : "rpl2",  "host" : "rpl2/20.10x.91.119:27037,20.10x.91.119:27038" }
   databases:
   {  "_id" : "admin",  "partitioned" : false,  "primary" : "config" }
   {  "_id" : "test",  "partitioned" : true,  "primary" : "rpl1" }
     test.tc chunks:
         rpl1    1
       { "ip" : { $minKey : 1 } } -->> { "ip" : { $maxKey : 1 } } on : rpl1 { "t" : 1000, "i" : 0 }
     test.tc2 chunks:
         rpl1    62
         rpl2    61
       { "xx" : { $minKey : 1 } } -->> { "xx" : 1 } on : rpl1 { "t" : 59000, "i" : 1 }
       { "xx" : 1 } -->> { "xx" : 2291 } on : rpl1 { "t" : 2000, "i" : 2 }
       { "xx" : 2291 } -->> { "xx" : 4582 } on : rpl1 { "t" : 2000, "i" : 4 }
       { "xx" : 4582 } -->> { "xx" : 6377 } on : rpl1 { "t" : 2000, "i" : 6 }
       { "xx" : 6377 } -->> { "xx" : 8095 } on : rpl1 { "t" : 2000, "i" : 8 }
       { "xx" : 8095 } -->> { "xx" : 9813 } on : rpl1 { "t" : 2000, "i" : 10 }
       { "xx" : 9813 } -->> { "xx" : 11919 } on : rpl1 { "t" : 2000, "i" : 12 }
       { "xx" : 11919 } -->> { "xx" : 14210 } on : rpl1 { "t" : 2000, "i" : 14 }
       { "xx" : 14210 } -->> { "xx" : 18563 } on : rpl1 { "t" : 2000, "i" : 16 }
       { "xx" : 18563 } -->> { "xx" : 23146 } on : rpl1 { "t" : 2000, "i" : 18 }
       { "xx" : 23146 } -->> { "xx" : 27187 } on : rpl1 { "t" : 2000, "i" : 20 }
       { "xx" : 27187 } -->> { "xx" : 31770 } on : rpl1 { "t" : 2000, "i" : 22 }
       { "xx" : 31770 } -->> { "xx" : 35246 } on : rpl1 { "t" : 2000, "i" : 24 }
       { "xx" : 35246 } -->> { "xx" : 38683 } on : rpl1 { "t" : 2000, "i" : 26 }
       { "xx" : 38683 } -->> { "xx" : 42120 } on : rpl1 { "t" : 2000, "i" : 28 }
       { "xx" : 42120 } -->> { "xx" : 45557 } on : rpl1 { "t" : 2000, "i" : 30 }
       { "xx" : 45557 } -->> { "xx" : 48994 } on : rpl1 { "t" : 2000, "i" : 32 }
       { "xx" : 48994 } -->> { "xx" : 53242 } on : rpl1 { "t" : 2000, "i" : 34 }
       { "xx" : 53242 } -->> { "xx" : 62409 } on : rpl1 { "t" : 2000, "i" : 36 }
       { "xx" : 62409 } -->> { "xx" : 71576 } on : rpl1 { "t" : 2000, "i" : 38 }
       { "xx" : 71576 } -->> { "xx" : 80743 } on : rpl1 { "t" : 2000, "i" : 40 }
       { "xx" : 80743 } -->> { "xx" : 89910 } on : rpl1 { "t" : 2000, "i" : 42 }
       { "xx" : 89910 } -->> { "xx" : 99077 } on : rpl1 { "t" : 2000, "i" : 44 }
       { "xx" : 99077 } -->> { "xx" : 119382 } on : rpl1 { "t" : 2000, "i" : 46 }
       { "xx" : 119382 } -->> { "xx" : 133133 } on : rpl1 { "t" : 2000, "i" : 48 }
       { "xx" : 133133 } -->> { "xx" : 146884 } on : rpl1 { "t" : 2000, "i" : 50 }
       { "xx" : 146884 } -->> { "xx" : 160635 } on : rpl1 { "t" : 2000, "i" : 52 }
       { "xx" : 160635 } -->> { "xx" : 178457 } on : rpl1 { "t" : 2000, "i" : 54 }
       { "xx" : 178457 } -->> { "xx" : 200508 } on : rpl1 { "t" : 2000, "i" : 56 }
       { "xx" : 200508 } -->> { "xx" : 214259 } on : rpl1 { "t" : 2000, "i" : 58 }
       { "xx" : 214259 } -->> { "xx" : 228010 } on : rpl1 { "t" : 2000, "i" : 60 }
       { "xx" : 228010 } -->> { "xx" : 241761 } on : rpl1 { "t" : 2000, "i" : 62 }
       { "xx" : 241761 } -->> { "xx" : 255512 } on : rpl1 { "t" : 2000, "i" : 64 }
       { "xx" : 255512 } -->> { "xx" : 279630 } on : rpl1 { "t" : 2000, "i" : 66 }
       { "xx" : 279630 } -->> { "xx" : 301723 } on : rpl1 { "t" : 2000, "i" : 68 }
       { "xx" : 301723 } -->> { "xx" : 317196 } on : rpl1 { "t" : 2000, "i" : 70 }
       { "xx" : 317196 } -->> { "xx" : 336533 } on : rpl1 { "t" : 2000, "i" : 72 }
       { "xx" : 336533 } -->> { "xx" : 359500 } on : rpl1 { "t" : 2000, "i" : 74 }
       { "xx" : 359500 } -->> { "xx" : 385354 } on : rpl1 { "t" : 2000, "i" : 76 }
       { "xx" : 385354 } -->> { "xx" : 400837 } on : rpl1 { "t" : 2000, "i" : 78 }
       { "xx" : 400837 } -->> { "xx" : 422259 } on : rpl1 { "t" : 2000, "i" : 80 }
       { "xx" : 422259 } -->> { "xx" : 444847 } on : rpl1 { "t" : 2000, "i" : 82 }
       { "xx" : 444847 } -->> { "xx" : 472084 } on : rpl1 { "t" : 2000, "i" : 84 }
       { "xx" : 472084 } -->> { "xx" : 490796 } on : rpl1 { "t" : 2000, "i" : 86 }
       { "xx" : 490796 } -->> { "xx" : 509498 } on : rpl1 { "t" : 2000, "i" : 88 }
       { "xx" : 509498 } -->> { "xx" : 534670 } on : rpl1 { "t" : 2000, "i" : 90 }
       { "xx" : 534670 } -->> { "xx" : 561927 } on : rpl1 { "t" : 2000, "i" : 92 }
       { "xx" : 561927 } -->> { "xx" : 586650 } on : rpl1 { "t" : 2000, "i" : 94 }
       { "xx" : 586650 } -->> { "xx" : 606316 } on : rpl1 { "t" : 2000, "i" : 96 }
       { "xx" : 606316 } -->> { "xx" : 632292 } on : rpl1 { "t" : 2000, "i" : 98 }
       { "xx" : 632292 } -->> { "xx" : 650179 } on : rpl1 { "t" : 2000, "i" : 100 }
       { "xx" : 650179 } -->> { "xx" : 670483 } on : rpl1 { "t" : 2000, "i" : 102 }
       { "xx" : 670483 } -->> { "xx" : 695898 } on : rpl1 { "t" : 2000, "i" : 104 }
       { "xx" : 695898 } -->> { "xx" : 719853 } on : rpl1 { "t" : 2000, "i" : 106 }
       { "xx" : 719853 } -->> { "xx" : 734751 } on : rpl1 { "t" : 2000, "i" : 108 }
       { "xx" : 734751 } -->> { "xx" : 757143 } on : rpl1 { "t" : 2000, "i" : 110 }
       { "xx" : 757143 } -->> { "xx" : 773800 } on : rpl1 { "t" : 2000, "i" : 112 }
       { "xx" : 773800 } -->> { "xx" : 796919 } on : rpl1 { "t" : 2000, "i" : 114 }
       { "xx" : 796919 } -->> { "xx" : 814262 } on : rpl1 { "t" : 2000, "i" : 116 }
       { "xx" : 814262 } -->> { "xx" : 837215 } on : rpl1 { "t" : 2000, "i" : 118 }
       { "xx" : 837215 } -->> { "xx" : 855766 } on : rpl1 { "t" : 2000, "i" : 120 }
       { "xx" : 855766 } -->> { "xx" : 869517 } on : rpl1 { "t" : 2000, "i" : 122 }
       { "xx" : 869517 } -->> { "xx" : 883268 } on : rpl2 { "t" : 59000, "i" : 0 }
       { "xx" : 883268 } -->> { "xx" : 897019 } on : rpl2 { "t" : 58000, "i" : 0 }
       { "xx" : 897019 } -->> { "xx" : 919595 } on : rpl2 { "t" : 57000, "i" : 0 }
       { "xx" : 919595 } -->> { "xx" : 946611 } on : rpl2 { "t" : 56000, "i" : 0 }
       { "xx" : 946611 } -->> { "xx" : 966850 } on : rpl2 { "t" : 55000, "i" : 0 }
       { "xx" : 966850 } -->> { "xx" : 989291 } on : rpl2 { "t" : 54000, "i" : 0 }
       { "xx" : 989291 } -->> { "xx" : 1008580 } on : rpl2 { "t" : 53000, "i" : 0 }
       { "xx" : 1008580 } -->> { "xx" : 1022331 } on : rpl2 { "t" : 52000, "i" : 0 }
       { "xx" : 1022331 } -->> { "xx" : 1036082 } on : rpl2 { "t" : 51000, "i" : 0 }
       { "xx" : 1036082 } -->> { "xx" : 1060888 } on : rpl2 { "t" : 50000, "i" : 0 }
       { "xx" : 1060888 } -->> { "xx" : 1088121 } on : rpl2 { "t" : 49000, "i" : 0 }
       { "xx" : 1088121 } -->> { "xx" : 1101872 } on : rpl2 { "t" : 48000, "i" : 0 }
       { "xx" : 1101872 } -->> { "xx" : 1122160 } on : rpl2 { "t" : 47000, "i" : 0 }
       { "xx" : 1122160 } -->> { "xx" : 1143537 } on : rpl2 { "t" : 46000, "i" : 0 }
       { "xx" : 1143537 } -->> { "xx" : 1168372 } on : rpl2 { "t" : 45000, "i" : 0 }
       { "xx" : 1168372 } -->> { "xx" : 1182123 } on : rpl2 { "t" : 44000, "i" : 0 }
       { "xx" : 1182123 } -->> { "xx" : 1201952 } on : rpl2 { "t" : 43000, "i" : 0 }
       { "xx" : 1201952 } -->> { "xx" : 1219149 } on : rpl2 { "t" : 42000, "i" : 0 }
       { "xx" : 1219149 } -->> { "xx" : 1232900 } on : rpl2 { "t" : 41000, "i" : 0 }
       { "xx" : 1232900 } -->> { "xx" : 1247184 } on : rpl2 { "t" : 40000, "i" : 0 }
       { "xx" : 1247184 } -->> { "xx" : 1270801 } on : rpl2 { "t" : 39000, "i" : 0 }
       { "xx" : 1270801 } -->> { "xx" : 1294343 } on : rpl2 { "t" : 38000, "i" : 0 }
       { "xx" : 1294343 } -->> { "xx" : 1313250 } on : rpl2 { "t" : 37000, "i" : 0 }
       { "xx" : 1313250 } -->> { "xx" : 1336332 } on : rpl2 { "t" : 36000, "i" : 0 }
       { "xx" : 1336332 } -->> { "xx" : 1358840 } on : rpl2 { "t" : 35000, "i" : 0 }
       { "xx" : 1358840 } -->> { "xx" : 1372591 } on : rpl2 { "t" : 34000, "i" : 0 }
       { "xx" : 1372591 } -->> { "xx" : 1386342 } on : rpl2 { "t" : 33000, "i" : 0 }
       { "xx" : 1386342 } -->> { "xx" : 1400093 } on : rpl2 { "t" : 32000, "i" : 0 }
       { "xx" : 1400093 } -->> { "xx" : 1418372 } on : rpl2 { "t" : 31000, "i" : 0 }
       { "xx" : 1418372 } -->> { "xx" : 1440590 } on : rpl2 { "t" : 30000, "i" : 0 }
       { "xx" : 1440590 } -->> { "xx" : 1461034 } on : rpl2 { "t" : 29000, "i" : 0 }
       { "xx" : 1461034 } -->> { "xx" : 1488305 } on : rpl2 { "t" : 28000, "i" : 0 }
       { "xx" : 1488305 } -->> { "xx" : 1510326 } on : rpl2 { "t" : 27000, "i" : 0 }
       { "xx" : 1510326 } -->> { "xx" : 1531986 } on : rpl2 { "t" : 26000, "i" : 0 }
       { "xx" : 1531986 } -->> { "xx" : 1545737 } on : rpl2 { "t" : 25000, "i" : 0 }
       { "xx" : 1545737 } -->> { "xx" : 1559488 } on : rpl2 { "t" : 24000, "i" : 0 }
       { "xx" : 1559488 } -->> { "xx" : 1576755 } on : rpl2 { "t" : 23000, "i" : 0 }
       { "xx" : 1576755 } -->> { "xx" : 1596977 } on : rpl2 { "t" : 22000, "i" : 0 }
       { "xx" : 1596977 } -->> { "xx" : 1619863 } on : rpl2 { "t" : 21000, "i" : 0 }
       { "xx" : 1619863 } -->> { "xx" : 1633614 } on : rpl2 { "t" : 20000, "i" : 0 }
       { "xx" : 1633614 } -->> { "xx" : 1647365 } on : rpl2 { "t" : 19000, "i" : 0 }
       { "xx" : 1647365 } -->> { "xx" : 1668372 } on : rpl2 { "t" : 18000, "i" : 0 }
       { "xx" : 1668372 } -->> { "xx" : 1682123 } on : rpl2 { "t" : 17000, "i" : 0 }
       { "xx" : 1682123 } -->> { "xx" : 1695874 } on : rpl2 { "t" : 16000, "i" : 0 }
       { "xx" : 1695874 } -->> { "xx" : 1711478 } on : rpl2 { "t" : 15000, "i" : 0 }
       { "xx" : 1711478 } -->> { "xx" : 1738684 } on : rpl2 { "t" : 14000, "i" : 0 }
       { "xx" : 1738684 } -->> { "xx" : 1758083 } on : rpl2 { "t" : 13000, "i" : 0 }
       { "xx" : 1758083 } -->> { "xx" : 1773229 } on : rpl2 { "t" : 12000, "i" : 0 }
       { "xx" : 1773229 } -->> { "xx" : 1794767 } on : rpl2 { "t" : 11000, "i" : 0 }
       { "xx" : 1794767 } -->> { "xx" : 1808518 } on : rpl2 { "t" : 10000, "i" : 0 }
       { "xx" : 1808518 } -->> { "xx" : 1834892 } on : rpl2 { "t" : 9000, "i" : 0 }
       { "xx" : 1834892 } -->> { "xx" : 1848643 } on : rpl2 { "t" : 8000, "i" : 0 }
       { "xx" : 1848643 } -->> { "xx" : 1873297 } on : rpl2 { "t" : 7000, "i" : 0 }
       { "xx" : 1873297 } -->> { "xx" : 1887048 } on : rpl2 { "t" : 6000, "i" : 2 }
       { "xx" : 1887048 } -->> { "xx" : 1911702 } on : rpl2 { "t" : 6000, "i" : 3 }
       { "xx" : 1911702 } -->> { "xx" : 1918372 } on : rpl2 { "t" : 5000, "i" : 0 }
       { "xx" : 1918372 } -->> { "xx" : 1932123 } on : rpl2 { "t" : 7000, "i" : 2 }
       { "xx" : 1932123 } -->> { "xx" : 1959185 } on : rpl2 { "t" : 7000, "i" : 3 }
       { "xx" : 1959185 } -->> { "xx" : 1972936 } on : rpl2 { "t" : 9000, "i" : 2 }
       { "xx" : 1972936 } -->> { "xx" : 1999999 } on : rpl2 { "t" : 9000, "i" : 3 }
       { "xx" : 1999999 } -->> { "xx" : { $maxKey : 1 } } on : rpl2 { "t" : 2000, "i" : 0 }
     test.tickets chunks:
         rpl1    1
       { "ip" : { $minKey : 1 } } -->> { "ip" : { $maxKey : 1 } } on : rpl1 { "t" : 1000, "i" : 0 }
   {  "_id" : "adin",  "partitioned" : false,  "primary" : "rpl1" }

 mongos> 
 
 7.7.2 vertify if it is a sharding
 [root@472322 ~]# /db/mongodb/bin/mongo --port 27027
 MongoDB shell version: 2.0.1
 connecting to: 127.0.0.1:27027/test
 PRIMARY> db.runCommand({ isdbgrid:1 });
 {
   "errmsg" : "no such cmd: isdbgrid",
   "bad cmd" : {
     "isdbgrid" : 1
   },
   "ok" : 0
 }
 PRIMARY> 
 there is errmsg info, run it in wrong windows,maybe run it in the mongos window.
 
 [root@472322 ~]# /db/mongodb/bin/mongo --port 27017
 MongoDB shell version: 2.0.1
 connecting to: 127.0.0.1:27017/test
 mongos> db.runCommand({ isdbgrid:1 });
 { "isdbgrid" : 1, "hostname" : "472322.ea.com", "ok" : 1 }
 mongos> 
 ok,  "isdbgrid" : 1 means it is a sharding.
 
 7.8 shared for unshared collection
 7.8.1 prepared a collection in mongo window.

 for( var i = 1; i < 2000000; i++ ) db.tc3.insert({ "xx":i, "fapp" : "84eb9fb556074d6481e31915ac2427f0",  "dne" : "ueeDEhIB6tmP4cfY43NwWvAenzKWx19znmbheAuBl4j39U8uFXS1QGi2GCMHO7L21szgeF6Iquqmnw8kfJbvZUs/11RyxcoRm+otbUJyPPxFkevzv4SrI3kGxczG6Lsd19NBpyskaElCTtVKxwvQyBNgciXYq6cO/8ntV2C6cwQ=",  "eml" : "q5x68h3qyVBqp3ollJrY3XEkXECjPEncXhbJjga+3hYoa4zYNhrNmBN91meL3o7jsBI/N6qe2bb2BOnOJNAnBMDzhNmPqJKG/ZVLfT9jpNkUD/pQ4oJENMv72L2GZoiyym2IFT+oT3N0KFhcv08b9ke9tm2EHTGcBsGg1R40Ah+Y/5z89OI4ERmI/48qjvaw",  "uid" : "sQt92NUPr3CpCVnbpotU2lqRNVfZD6k/9TGW62UT7ExZYF8Dp1cWIVQoYNQVyFRLkxjmCoa8m6DiLiL/fPdG1k7WYGUH4ueXXK2yfVn/AGUk3pQbIuh7nFbqZCrAQtEY7gU0aIGC4sotAE8kghvCa5qWnSX0SWTViAE/esaWORo=",  "agt" : "PHP/eaSSOPlugin",  "sd" : "S15345853557133877",  "pt" : 3795,  "ip" : "211.223.160.34",  "av" : "http://secure.download.dm.origin.com/production/avatar/prod/1/599/40x40.JPEG",  "nex" : ISODate("2013-01-18T04:00:32.41Z"),  "exy" : ISODate("2013-01-18T01:16:32.015Z"),  "chk" : "sso4648609868740971",  "aid" : "Ciyvab0tregdVsBtboIpeChe4G6uzC1v5_-SIxmvSLLINJClUkXJhNvWkSUnajzi8xsv1DGYm0D3V46LLFI-61TVro9-HrZwyRwyTf9NwYIyentrgAY_qhs8fh7unyfB",  "tid" : "rUqFhONysi0yA==13583853927872",  "date" : ISODate("2012-02-17T01:16:32.787Z"),  "v" : "2.0.0",  "scope" : [],  "rug" : false,  "schk" : true,  "fjs" : false,  "sites" : [{      "name" : "Origin.com",      "id" : "nb09xrt8384147bba27c2f12e112o8k9",      "last" : ISODate("2013-01-17T01:16:32.787Z"),      "_id" : ObjectId("50f750f06a56028661000f20")    }]});
 db.tc3.ensureIndex({xx:1});
 see the status of sharding
 db.tc3.stats();
 mongos> db.tc3.stats();
 {
   "sharded" : false,
   "primary" : "rpl1",
   "ns" : "test.tc3",
   "count" : 1999999,
   "size" : 2439998940,
   "avgObjSize" : 1220.00008000004,
   "storageSize" : 2480209920,
   "numExtents" : 29,
   "nindexes" : 2,
   "lastExtentSize" : 417480704,
   "paddingFactor" : 1,
   "flags" : 1,
   "totalIndexSize" : 115232544,
   "indexSizes" : {
     "_id_" : 64909264,
     "xx_1" : 50323280
   },
   "ok" : 1
 }
 mongos> 
 
 7.8.2 enable the sharding,Shard a Collection Using a Hashed Shard Key "xx"
 sh.shardCollection( "test.tc3", { xx: "hashed" } ) or  db.runCommand( { shardCollection : "test.tc3", key : {"xx":1} })
 mongos>  sh.shardCollection( "test.tc3", { xx: "hashed" } ) ;
 command failed: { "ok" : 0, "errmsg" : "shard keys must all be ascending" }
 shard keys must all be ascending
 mongos> 
 why failed ? i see thehttp://docs.mongodb.org/manual/reference/method/sh.shardCollection/
 and found "New in version 2.4: Use the form {field: "hashed"} to create a hashed shard key. Hashed shard keys may not be compound indexes.",
 and the current is 2.0.1,so i should use the other way to enable.
 mongos> db.runCommand( { shardCollection : "test.tc3", key : {"xx":1} })
 { "ok" : 0, "errmsg" : "access denied - use admin db" }
 mongos> use admin
 switched to db admin
 mongos> db.runCommand( { shardCollection : "test.tc3", key : {"xx":1} })
 { "collectionsharded" : "test.tc3", "ok" : 1 }
 mongos> 
 nice,enable successfully.
 
 7.8.3 and see the status of sharding
 mongos> use test;
 switched to db test
 mongos> db.tc3.stats();
 {
   "sharded" : true,  -- nice, it is a sharding now
   "flags" : 1,
   "ns" : "test.tc3",
   "count" : 2005360,
   "numExtents" : 48,
   "size" : 2446539448,
   "storageSize" : 2979864576,
   "totalIndexSize" : 116573408,
   "indexSizes" : {
     "_id_" : 65105488,
     "xx_1" : 51467920
   },
   "avgObjSize" : 1220.0001236685682,
   "nindexes" : 2,
   "nchunks" : 73,
   "shards" : {
     "rpl1" : {
       "ns" : "test.tc3",
       "count" : 1647809,
       "size" : 2010326980,
       "avgObjSize" : 1220,
       "storageSize" : 2480209920,
       "numExtents" : 29,
       "nindexes" : 2,
       "lastExtentSize" : 417480704,
       "paddingFactor" : 1,
       "flags" : 1,
       "totalIndexSize" : 94956064,
       "indexSizes" : {
         "_id_" : 53487392,
         "xx_1" : 41468672
       },
       "ok" : 1
     },
     "rpl2" : {
       "ns" : "test.tc3",
       "count" : 357551,
       "size" : 436212468,
       "avgObjSize" : 1220.0006936073455,
       "storageSize" : 499654656,
       "numExtents" : 19,
       "nindexes" : 2,
       "lastExtentSize" : 89817088,
       "paddingFactor" : 1,
       "flags" : 1,
       "totalIndexSize" : 21617344,
       "indexSizes" : {
         "_id_" : 11618096,
         "xx_1" : 9999248
       },
       "ok" : 1
     }
   },
   "ok" : 1
 }
 mongos>  
 
 mongos> db.printShardingStatus();
 --- Sharding Status --- 
   sharding version: { "_id" : 1, "version" : 3 }
   shards:
   {  "_id" : "rpl1",  "host" : "rpl1/20.10x.91.119:27027,20.10x.91.119:27028" }
   {  "_id" : "rpl2",  "host" : "rpl2/20.10x.91.119:27037,20.10x.91.119:27038" }
   databases:
   {  "_id" : "admin",  "partitioned" : false,  "primary" : "config" }
   {  "_id" : "test",  "partitioned" : true,  "primary" : "rpl1" }
     test.tc chunks:
         rpl1    1
       { "ip" : { $minKey : 1 } } -->> { "ip" : { $maxKey : 1 } } on : rpl1 { "t" : 1000, "i" : 0 }
     test.tc2 chunks:
         rpl1    62
         rpl2    61
       too many chunks to print, use verbose if you want to force print
     test.tc3 chunks:
         rpl2    19
         rpl1    54
       too many chunks to print, use verbose if you want to force print  
       -- see this,there are 19 chunks in rpl2,so data is switching to rpl2 now.
     test.tickets chunks:
         rpl1    1
       { "ip" : { $minKey : 1 } } -->> { "ip" : { $maxKey : 1 } } on : rpl1 { "t" : 1000, "i" : 0 }
   {  "_id" : "adin",  "partitioned" : false,  "primary" : "rpl1" }

 mongos>

 

8 add the third new replica sets to sharding.
 8.1 config file
 8.1.1 create the data directory
 mkdir -p /opt/db/mongodb-data/db47
 mkdir -p /opt/db/mongodb-data/db48 
 mkdir -p /opt/db/mongodb-data/db49 
 
 8.1.2 set the config files 27047.conf
 [root@472322 ~]# cd /etc/mongodb/
 [root@472322 mongodb]# vi  27047.conf
 dbpath =/opt/db/mongodb-data/db47
 port = 27047
 rest = true
 fork = true
 logpath = /var/log/mongodb47.log
 logappend = true
 replSet = rpl3
 #diaglog = 3
 profile = 3
 slowms=50
 oplogSize=4000
 
 8.1.3 set the config files 27048.conf
 [root@472322 mongodb]#  vi  27048.conf
 # This is an example config file for MongoDB
 dbpath =/opt/db/mongodb-data/db48
 port = 27048
 rest = true
 fork = true
 logpath = /var/log/mongodb48.log
 logappend = true
 replSet = rpl3
 #diaglog = 3
 profile = 3
 slowms=50
 oplogSize=4000 
 
 8.1.4 set the config files 27049.conf 
 [root@472322 mongodb]#  vi  27049.conf
 # This is an example config file for MongoDB
 dbpath =/opt/db/mongodb-data/db49
 port = 27049
 rest = true
 fork = true
 logpath = /var/log/mongodb49.log
 logappend = true
 replSet = rpl3
 #diaglog = 3
 profile = 3
 slowms=50
 oplogSize=4000 
 
 8.2 start mongod server
 /db/mongodb/bin/mongod -f /etc/mongodb/27047.conf
 /db/mongodb/bin/mongod -f /etc/mongodb/27048.conf
 /db/mongodb/bin/mongod -f /etc/mongodb/27049.conf
 
 8.3 start replica set
 [root@472322 mongodb]# /db/mongodb/bin/mongo --port 27047
 MongoDB shell version: 2.0.1
 connecting to: 127.0.0.1:27047/test
 >
 config = {_id: 'rpl3', members: [
   {_id: 0, host: '20.10x.91.119:27047'},
   {_id: 1, host: '20.10x.91.119:27048'},
   {_id: 3, host: '20.10x.91.119:27049', arbiterOnly: true}
  ]};

 > config = {_id: 'rpl3', members: [
 ... {_id: 0, host: '20.10x.91.119:27047'},
 ... {_id: 1, host: '20.10x.91.119:27048'},
 ... {_id: 3, host: '20.10x.91.119:27049', arbiterOnly: true}
 ... ]};
 {
   "_id" : "rpl3",
   "members" : [
     {
       "_id" : 0,
       "host" : "20.10x.91.119:27047"
     },
     {
       "_id" : 1,
       "host" : "20.10x.91.119:27048"
     },
     {
       "_id" : 3,
       "host" : "20.10x.91.119:27049",
       "arbiterOnly" : true
     }
   ]
 }
 > rs.initiate(config);
 {
   "info" : "Config now saved locally.  Should come online in about a minute.",
   "ok" : 1
 }
 > rs.status();
 {
   "set" : "rpl3",
   "date" : ISODate("2013-08-09T06:53:57Z"),
   "myState" : 1,
   "members" : [
     {
       "_id" : 0,
       "name" : "20.10x.91.119:27047",
       "health" : 1,
       "state" : 1,
       "stateStr" : "PRIMARY",
       "optime" : {
         "t" : 1376031176000,
         "i" : 1
       },
       "optimeDate" : ISODate("2013-08-09T06:52:56Z"),
       "self" : true
     },
     {
       "_id" : 1,
       "name" : "20.10x.91.119:27048",
       "health" : 1,
       "state" : 2,
       "stateStr" : "SECONDARY",
       "uptime" : 49,
       "optime" : {
         "t" : 1376031176000,
         "i" : 1
       },
       "optimeDate" : ISODate("2013-08-09T06:52:56Z"),
       "lastHeartbeat" : ISODate("2013-08-09T06:53:56Z"),
       "pingMs" : 0
     },
     {
       "_id" : 3,
       "name" : "20.10x.91.119:27049",
       "health" : 1,
       "state" : 7,
       "stateStr" : "ARBITER",
       "uptime" : 55,
       "optime" : {
         "t" : 0,
         "i" : 0
       },
       "optimeDate" : ISODate("1970-01-01T00:00:00Z"),
       "lastHeartbeat" : ISODate("2013-08-09T06:53:56Z"),
       "pingMs" : 0
     }
   ],
   "ok" : 1
 }
 OKay, the third replica set is done now.
 
 8.4 add the third replica set to the sharding
 8.4.1 run "sh.addShard( "rpl3/20.10x.91.119:27047,20.10x.91.119:27048,20.10x.91.119:27049" )" in mongos;
 [root@472322 mongodb]# /db/mongodb/bin/mongo --port 27018
 MongoDB shell version: 2.0.1
 connecting to: 127.0.0.1:27018/test
 mongos> use admin
 switched to db admin
 mongos> sh.addShard( "rpl3/20.10x.91.119:27047,20.10x.91.119:27048,20.10x.91.119:27049" );
 mongos>
 
 8.4.2 check the tc3 collections,watch if tc3 has chunks in rpl3 sharding
 mongos> use test;
 switched to db test
 mongos> db.tc3.stats();
 {
   "sharded" : true,
   "flags" : 1,
   "ns" : "test.tc3",
   "count" : 2027503,
   "numExtents" : 71,
   "size" : 2473554192,
   "storageSize" : 4191793152,
   "totalIndexSize" : 127970752,
   "indexSizes" : {
     "_id_" : 70027440,
     "xx_1" : 57943312
   },
   "avgObjSize" : 1220.0002623917203,
   "nindexes" : 2,
   "nchunks" : 73,
   "shards" : {
     "rpl1" : {
       "ns" : "test.tc3",
       "count" : 844832,
       "size" : 1030695040,
       "avgObjSize" : 1220,
       "storageSize" : 2480209920,
       "numExtents" : 29,
       "nindexes" : 2,
       "lastExtentSize" : 417480704,
       "paddingFactor" : 1,
       "flags" : 1,
       "totalIndexSize" : 48712608,
       "indexSizes" : {
         "_id_" : 27438656,
         "xx_1" : 21273952
       },
       "ok" : 1
     },
     "rpl2" : {
       "ns" : "test.tc3",
       "count" : 852623,
       "size" : 1040200396,
       "avgObjSize" : 1220.000394078039,
       "storageSize" : 1301745664,
       "numExtents" : 24,
       "nindexes" : 2,
       "lastExtentSize" : 223506432,
       "paddingFactor" : 1,
       "flags" : 1,
       "totalIndexSize" : 52677968,
       "indexSizes" : {
         "_id_" : 28313488,
         "xx_1" : 24364480
       },
       "ok" : 1
     },
     "rpl3" : {
       "ns" : "test.tc3", -- nice, and there are chunks in the new third rpl3 sharding.
       "count" : 330048,
       "size" : 402658756,
       "avgObjSize" : 1220.0005938530153,
       "storageSize" : 409837568,
       "numExtents" : 18,
       "nindexes" : 2,
       "lastExtentSize" : 74846208,
       "paddingFactor" : 1,
       "flags" : 1,
       "totalIndexSize" : 26580176,
       "indexSizes" : {
         "_id_" : 14275296,
         "xx_1" : 12304880
       },
       "ok" : 1
     }
   },
   "ok" : 1
 }
 mongos>

 8.4.3 check all sharding status
 mongos> db.printShardingStatus();
 --- Sharding Status --- 
   sharding version: { "_id" : 1, "version" : 3 }
   shards:
   {  "_id" : "rpl1",  "host" : "rpl1/20.10x.91.119:27027,20.10x.91.119:27028" }
   {  "_id" : "rpl2",  "host" : "rpl2/20.10x.91.119:27037,20.10x.91.119:27038" }
   {  "_id" : "rpl3",  "host" : "rpl3/20.10x.91.119:27047,20.10x.91.119:27048" }
   databases:
   {  "_id" : "admin",  "partitioned" : false,  "primary" : "config" }
   {  "_id" : "test",  "partitioned" : true,  "primary" : "rpl1" }
     test.tc chunks:
         rpl1    1
       { "ip" : { $minKey : 1 } } -->> { "ip" : { $maxKey : 1 } } on : rpl1 { "t" : 1000, "i" : 0 }
     test.tc2 chunks:
         rpl3    21 -- there are data sharding in rpl3
         rpl1    51
         rpl2    51
       too many chunks to print, use verbose if you want to force print
     test.tc3 chunks:
         rpl2    27
         rpl3    20  -- there are data sharding in rpl3
         rpl1    26
       too many chunks to print, use verbose if you want to force print
     test.tickets chunks:
         rpl1    1
       { "ip" : { $minKey : 1 } } -->> { "ip" : { $maxKey : 1 } } on : rpl1 { "t" : 1000, "i" : 0 }
   {  "_id" : "adin",  "partitioned" : false,  "primary" : "rpl1" }

 mongos> 
 
Question 1:  how to change the sharding key in exists sharding collection,i cann't find eny method?


Question 2:  there are 3 mongos,how to use viturl ip to point one of the three mongos servers automaticly? 

 Sharp:不用使用vip,mongos在java驱动中就是自动切换的,只要都配置上就可以,驱动自己实现了高可用。启动不用使用nohup,fork就是后台运行的参数
不知道你们的机器是不是numa架构,启动要使用numa启动,

posted on 2015-12-18 13:54 paulwong 阅读(505) 评论(0)  编辑  收藏 所属分类: MONGODB


只有注册用户登录后才能发表评论。


网站导航: