Terry.Li-彬

虚其心,可解天下之问;专其心,可治天下之学;静其心,可悟天下之理;恒其心,可成天下之业。

  BlogJava :: 首页 :: 新随笔 :: 联系 :: 聚合  :: 管理 ::
  143 随笔 :: 344 文章 :: 130 评论 :: 0 Trackbacks

 


I've been testing Octopus for a couple of days and I think it's
exactly what I was looking for.

I have to load some data from a Sybase database (Adaptive server 12.5)
to a PostgreSQL (7.4) one, without including all the columns and
making some basic transformations.

I don't have problems using the Loader and import definitions
specifying the source and target tables. Nevertheless, I have a
problem with the Timestamp fields: I'm loosing the hours, minutes and
seconds. I'll try to explain it better:

Source: Sybase
Date format in conf/SybaseConf.xml
    
<DateFormat>yyyy-MM-dd hh:mm:ss.SS</DateFormat>
Original data
        2001-01-23 07:52:08.92
Column data type
        datetime


Target: PostgreSQL
Date format in conf/PostgreSQL.xml
    
<DateFormat>yyyy-MM-dd HH:mm:ss.SS</DateFormat>

New data
        2001-01-23 00:00:00.00
Column data type
        timestamp


I tried to using CSV JDBC as target driver and see if it was a Sybase
problem but it worked fine: the data in the CSV file was correct, with
hours, minutes and seconds. Then I thought it was a PostgreSQL issue,
so I used the CSV as the source driver and it also worked without
problems.

I enabled the P6Spy driver and turned on all the log messages to see
if there were any problems with the date format but I didn't find
anything. I also tried changing the date format in both drivers
configuration without success.

I'm sending the drivers configuration files and I list here my system
configuration:

PostgreSQL JDBC driver: 
pg74.216.jdbc3

Sybase JDBC driver:
com.sybase.jdbc2.jdbc.SybDriver (jconn2d)

Java VM version;
java version "1.4.2_02"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_02-b03)
Java HotSpot(TM) Client VM (build 1.4.2_02-b03, mixed mode)


I don't know what is wrong, nor even where the problem is. Any
suggestions would be appreciated.

Regards,

Juan Manuel Caicedo

<?xml version="1.0" encoding="UTF-8"?>
<LoaderConf>
<!-- =======================================================================================
LoaderGenerator Sybase database vendor configuration file.
======================================================================================== 
-->
<!--
The Database type used to store ObjectId's and Version'c
-->
<OidDbType>DECIMAL (19,0)</OidDbType>
<VersionDbType>SMALLINT</VersionDbType>
<!--
The OidDbColumnName, VersionDbColumnName are used for creating SQL CREATE TABLE
statements in the create_tables.sql and <classname>SQL.sql files
-->
<OidDbColumnName>oid</OidDbColumnName>
<VersionDbColumnName>version</VersionDbColumnName>
<!-- ExcludeTables - defines system tables which you want to exclude for reading -->
<ExcludeTables></ExcludeTables>
<!-- DateFormat
G  Era designator  Text  AD
y  Year  Year  1996; 96
M  Month in year  Month  July; Jul; 07
w  Week in year  Number  27
W  Week in month  Number  2
D  Day in year  Number  189
d  Day in month  Number  10
F  Day of week in month  Number  2
E  Day in week  Text  Tuesday; Tue
a  Am/pm marker  Text  PM
H  Hour in day (0-23)  Number  0
k  Hour in day (1-24)  Number  24
K  Hour in am/pm (0-11)  Number  0
h  Hour in am/pm (1-12)  Number  12
m  Minute in hour  Number  30
s  Second in minute  Number  55
S  Millisecond  Number  978
z  Time zone  General time zone  Pacific Standard Time; PST; GMT-08:00
Z  Time zone  RFC 822 time zone  -0800
Example:
"yyyy-MM-dd HH:mm:ss.SSS"    "2004-05-24 12:12:12.111"
"yyyy.MM.dd G 'at' HH:mm:ss z"  "2001.07.04 AD at 12:08:56 PDT"
"EEE, MMM d, ''yy"        "Wed, Jul 4, '01"
"yyyyy.MMMMM.dd GGG hh:mm aaa"  "02001.July.04 AD 12:08 PM"
If date format isn't given, default date format is "MM/dd/yyyy hh:mm:ss".
-->
<DateFormat>yyyy-MM-dd hh:mm:ss.SS</DateFormat>
<!--  Driver name -Driver name-->
<!--  ClassName - Driver class-->
<!--  Connection - Connection for the database-->
<!--  RequiredUser = "true/false" - if database requires ures and password for connecting-->
<!--  FirstColumnResult = "0/1" - first column in result set-->
<!--  EnableJumpInResult = "true/false" - if jdbc driver supports absolute(int) and relative(int) methods - jump in result set -->
<!--  AfterLastRow = "true/false"  - if jdbc driver supports moving pointer after the last row in result set-->
<!--  EnableOrderBy = "true/false" - if jdbc driver supports "order by" sql statements in sql commands.-->
<!--  AlterTablePrimaryKey -defines if the database support ALTER TABLE sql statemnts for creating the pirmary key.-->
<!--  MetaData -defines if the database support reading all meta data .-->
<!--  RowCountEnabled -defines if the database support count(*) method for counting the rows in database table.-->
<!--  SetFetchSizeEnabled -defines if the database support setFetchSize() method.-->
<!--  SetCursorNameEnabled -defines if the database support setCursorName() method. -->
<!--  SetEmptyStringAsNull - defines the possibility to convert an empty string to 'null' object or not-->
<!--  ReadingOrderRelevant - defines if order of reading data from source database is relevant or not -->
<!--  FileSystemDatabase - defines if this driver read/write on file system -->
<!--  MaxConstraintLength - defines max length of the name of constraint (primary key,index,..) -->
<!--  GetColumnsSupported - defines if this driver suport Connection.getMetaData().getColumns() method -->
<!--  SetMaxRowsSupported - defines if this driver support java.sql.Statement.setMaxRows().Used for target database because of better performance. -->
<Driver name="syb">
<ClassName value="com.sybase.jdbc2.jdbc.SybDriver"/>
<Connection value="jdbc:sybase:Tds:"/>
<RequiredUser value="true"/>
<FirstColumnResult value="1"/>
<EnableJumpInResult value="true"/>
<AfterLastRow value="true"/>
<EnableOrderBy value="true"/>
<AlterTablePrimaryKey value="true"/>
<MetaData value="true"/>
<RowCountEnabled value="false"/>
<SetFetchSizeEnabled value="false"/>
<SetCursorNameEnabled value="false"/>
<SetEmptyStringAsNull value="false"/>
<ReadingOrderRelevant value="false"/>
<FileSystemDatabase value="false"/>
<MaxConstraintLength value="-1"/>
<SetMaxRowsSupported value="false"/>
<GetColumnsSupported value="true"/>
</Driver>
<!--
Here we map vendor-specific data types to JDBC types.
Attributes:
isBinary - attribute is used to determine is this type binary or not
(isBinaryObject=true/false)
isNumber - attribute is used to determine if type is number or not
(isNumber=true/false)
hasSize - attribute is used to determine if type has defined size or not(hasSize=true/false).
This attribute is used by Octopus Generator. If attribute hasSize=false OctopusGenerator
will generate sql scripts without size for this type.
isDecimal - attribute is used to determine if type is decimal or not.
(isDecimal=true/false)
isDate - attribute is used to determine if this type is date.
(isDate=true/false)
isWithN - attribute is used to determine if this type need prefix N when using unicode characters.
(isWithN=true/false)
javaType - appropriate java type for this SQL type
NOTE: If sql type has space in name, use __ instead of space: -e.g: <INT__IDENTITY
-->
<SQLType>
<NONE javaType="java.lang.None">NONE</NONE>
<INTEGER javaType="java.lang.Integer">INTEGER</INTEGER>
<BIGINT isNumber="true" javaType="java.lang.Long">BIGINT</BIGINT>
<DATETIME isDate="true" javaType="java.sql.Timestamp">TIMESTAMP</DATETIME>
<MONEY isNumber="true" javaType="none">NONE</MONEY>
<SMALLDATETIME isDate="true" javaType="java.sql.Timestamp">TIMESTAMP</SMALLDATETIME>
<TINYINT javaType="java.lang.Byte">TINYINT</TINYINT>
<BINARY isBinary="true" javaType="byte[]">BINARY</BINARY>
<DECIMAL isDecimal="true" isNumber="true" hasSize="true" javaType="java.math.BigDecimal">DECIMAL</DECIMAL>
<NCHAR hasSize="true" javaType="java.lang.String">VARCHAR</NCHAR>
<SMALLINT isNumber="true" javaType="java.lang.Short">SMALLINT</SMALLINT>
<VARBINARY isBinary="true" hasSize="true" javaType="byte[]">VARBINARY</VARBINARY>
<BIT javaType="java.lang.Boolean">BIT</BIT>
<FLOAT isNumber="true" hasSize="true" javaType="java.lang.Float">FLOAT</FLOAT>
<NTEXT javaType="byte[]">BINARY</NTEXT>
<SMALLMONEY isNumber="true" javaType="none">NONE</SMALLMONEY>
<VARCHAR hasSize="true" javaType="java.lang.String">VARCHAR</VARCHAR>
<CHAR hasSize="true" javaType="java.lang.String">CHAR</CHAR>
<IMAGE isBinary="true" javaType="byte[]">LONGVARBINARY</IMAGE>
<NVARCHAR javaType="java.lang.String">LONGVARCHAR</NVARCHAR>
<LONGVARCHAR javaType="java.lang.String">VARCHAR</LONGVARCHAR>
<TEXT javaType="java.lang.String">LONGVARCHAR</TEXT>
<UNIQUEIDENTIFIER hasSize="true" javaType="none">NONE</UNIQUEIDENTIFIER>
<CURSOR hasSize="true" javaType="none">NONE</CURSOR>
<INT isNumber="true" javaType="java.lang.Integer">INTEGER</INT>
<REAL isNumber="true" javaType="java.lang.Float">REAL</REAL>
<TIMESTAMP isDate="true" javaType="java.sql.Timestamp">TIMESTAMP</TIMESTAMP>
</SQLType>
<!--
Here we map JDBC types to vendor-specific data types.
For almost all vendors, the JDBC types BIT, TINYINT, SMALLINT and BIGINT
are mapped to the data type INTEGER.
For most vendors, these types are actually INTEGER.
The following entries can be changed to impose size restrictions.
For example, to specify an actual size for a TINYINT, make the change:
Database.JDBCtype.TINYINT.Oracle="DECIMAL(4,0)"
Note that the "set" methods in the DO classes generated by DODS
do not test for size restrictions on integer values.
-->
<JDBCType>
<BIT>INTEGER</BIT>
<TINYINT>INTEGER</TINYINT>
<SMALLINT>INTEGER</SMALLINT>
<INTEGER>INTEGER</INTEGER>
<BIGINT>INTEGER</BIGINT>
<REAL>REAL</REAL>
<FLOAT>FLOAT</FLOAT>
<DOUBLE>DOUBLE</DOUBLE>
<NUMERIC>NUMERIC</NUMERIC>
<DECIMAL>DECIMAL</DECIMAL>
<CHAR>CHAR</CHAR>
<VARCHAR>VARCHAR</VARCHAR>
<LONGVARCHAR>TEXT</LONGVARCHAR>
<BINARY>BINARY</BINARY>
<VARBINARY>VARBINARY</VARBINARY>
<LONGVARBINARY>LONGVARBINARY</LONGVARBINARY>
<DATE>DATETIME</DATE>
<TIME>DATETIME</TIME>
<TIMESTAMP>DATETIME</TIMESTAMP>
</JDBCType>
</LoaderConf>

<?xml version="1.0" encoding="UTF-8"?>
<LoaderConf>
<!-- =======================================================================================
LoaderGenerator PostgreSQL database vendor configuration file.
======================================================================================== 
-->
<!--
The Database type used to store ObjectId's and Version'c
-->
<OidDbType>DECIMAL (19,0)</OidDbType>
<VersionDbType>BIGINT</VersionDbType>
<!--
The OidDbColumnName, VersionDbColumnName are used for creating SQL CREATE TABLE
statements in the create_tables.sql and <classname>SQL.sql files
-->
<OidDbColumnName>ObjectId</OidDbColumnName>
<VersionDbColumnName>ObjectVersion</VersionDbColumnName>
<!-- ExcludeTables - defines system tables which you want to exclude for reading -->
<ExcludeTables></ExcludeTables>
<!-- DateFormat
G  Era designator  Text  AD
y  Year  Year  1996; 96
M  Month in year  Month  July; Jul; 07
w  Week in year  Number  27
W  Week in month  Number  2
D  Day in year  Number  189
d  Day in month  Number  10
F  Day of week in month  Number  2
E  Day in week  Text  Tuesday; Tue
a  Am/pm marker  Text  PM
H  Hour in day (0-23)  Number  0
k  Hour in day (1-24)  Number  24
K  Hour in am/pm (0-11)  Number  0
h  Hour in am/pm (1-12)  Number  12
m  Minute in hour  Number  30
s  Second in minute  Number  55
S  Millisecond  Number  978
z  Time zone  General time zone  Pacific Standard Time; PST; GMT-08:00
Z  Time zone  RFC 822 time zone  -0800
Example:
"yyyy-MM-dd HH:mm:ss.SSS"    "2004-05-24 12:12:12.111"
"yyyy.MM.dd G 'at' HH:mm:ss z"  "2001.07.04 AD at 12:08:56 PDT"
"EEE, MMM d, ''yy"        "Wed, Jul 4, '01"
"yyyyy.MMMMM.dd GGG hh:mm aaa"  "02001.July.04 AD 12:08 PM"
If date format isn't given, default date format is "MM/dd/yyyy hh:mm:ss".
-->
<DateFormat>yyyy-MM-dd HH:mm:ss.SS</DateFormat>
<!--  Driver name -Driver name-->
<!--  ClassName - Driver class-->
<!--  Connection - Connection for the database-->
<!--  RequiredUser = "true/false" - if database requires user and password for connecting-->
<!--  FirstColumnResult = "0/1" - first column in result set-->
<!--  EnableJumpInResult = "true/false" - if jdbc driver supports absolute(int) and relative(int) methods - jump in result set -->
<!--  AfterLastRow = "true/false"  - if jdbc driver supports moving pointer after the last row in result set-->
<!--  EnableOrderBy = "true/false" - if jdbc driver supports "order by" sql statements in sql commands.-->
<!--  AlterTablePrimaryKey -defines if the database support ALTER TABLE sql statemnts for creating the pirmary key.-->
<!--  MetaData -defines if the database support reading all meta data .-->
<!--  RowCountEnabled -defines if the database support count(*) method for counting the rows in database table.-->
<!--  SetFetchSizeEnabled -defines if the database support setFetchSize() method.-->
<!--  SetCursorNameEnabled -defines if the database support setCursorName() method. -->
<!--  SetEmptyStringAsNull - defines the possibility to convert an empty string to 'null' object or not-->
<!--  ReadingOrderRelevant - defines if order of reading data from source database is relevant or not -->
<!--  FileSystemDatabase - defines if this driver read/write on file system -->
<!--  MaxConstraintLength - defines max length of the name of constraint (primary key,index,..) -->
<!--  GetColumnsSupported - defines if this driver suport Connection.getMetaData().getColumns() method -->
<!--  SetMaxRowsSupported - defines if this driver support java.sql.Statement.setMaxRows().Used for target database because of better performance. -->
<Driver name="postgresql">
<ClassName value="org.postgresql.Driver"/>
<Connection value="jdbc:postgresql://"/>
<RequiredUser value="true"/>
<FirstColumnResult value="1"/>
<EnableJumpInResult value="true"/>
<AfterLastRow value="true"/>
<EnableOrderBy value="true"/>
<AlterTablePrimaryKey value="true"/>
<MetaData value="true"/>
<RowCountEnabled value="false"/>
<SetFetchSizeEnabled value="true"/>
<SetCursorNameEnabled value="false"/>
<SetEmptyStringAsNull value="false"/>
<ReadingOrderRelevant value="false"/>
<FileSystemDatabase value="false"/>
<MaxConstraintLength value="-1"/>
<GetColumnsSupported value="true"/>
<SetMaxRowsSupported value="true"/>
</Driver>
<!--
Here we map vendor-specific data types to JDBC types.
Attributes:
isBinary - attribute is used to determine is this type binary or not
(isBinaryObject=true/false)
isNumber - attribute is used to determine if type is number or not
(isNumber=true/false)
hasSize - attribute is used to determine if type has defined size or not(hasSize=true/false).
This attribute is used by Octopus Generator. If attribute hasSize=false OctopusGenerator
will generate sql scripts without size for this type.
isDecimal - attribute is used to determine if type is decimal or not.
(isDecimal=true/false)
isDate - attribute is used to determine if this type is date.
(isDate=true/false)
isWithN - attribute is used to determine if this type need prefix N when using unicode characters.
(isWithN=true/false)
javaType - appropriate java type for this SQL type
NOTE: If sql type has space in name, use __ instead of space: -e.g: <INT__IDENTITY
-->
<SQLType>
<BIGINT isNumber="true" javaType="java.lang.Long">BIGINT</BIGINT>
<BIGSERIAL hasSize="true" javaType="none">NOT SUPPORTED</BIGSERIAL>
<BIT javaType="java.lang.Byte">BIT</BIT>
<VARBIT hasSize="true" javaType="byte[]">BINARY</VARBIT>
<BOOLEAN hasSize="true" javaType="java.lang.Boolean">BOOLEAN</BOOLEAN>
<BOOL hasSize="true" javaType="java.lang.Boolean">BOOLEAN</BOOL>
<BYTEA javaType="byte[]">BINARY</BYTEA>
<CHAR hasSize="true" javaType="java.lang.String">CHAR</CHAR>
<CHARACTER hasSize="true" javaType="java.lang.String">CHAR</CHARACTER>
<VARCHAR hasSize="true" javaType="java.lang.String">VARCHAR</VARCHAR>
<DATE isDate="true" javaType="java.sql.Date">DATE</DATE>
<FLOAT8 hasSize="true" javaType="java.lang.Double">DOUBLE</FLOAT8>
<INTEGER javaType="java.lang.Integer">INTEGER</INTEGER>
<INT isNumber="true" javaType="java.lang.Integer">INTEGER</INT>
<INT2 javaType="java.lang.Integer">TINYINT</INT2>
<INT4 javaType="java.lang.Integer">INTEGER</INT4>
<INT8 javaType="java.lang.Integer">INTEGER</INT8>
<MONEY isNumber="true" javaType="byte[]">BINARY</MONEY>
<DECIMAL isDecimal="true" isNumber="true" hasSize="true" javaType="java.math.BigDecimal">DECIMAL</DECIMAL>
<NUMERIC isNumber="true" hasSize="true" javaType="java.math.BigDecimal">DECIMAL</NUMERIC>
<REAL isNumber="true" javaType="java.lang.Float">REAL</REAL>
<FLOAT4 hasSize="true" javaType="java.lang.Float">REAL</FLOAT4>
<SMALLINT isNumber="true" javaType="java.lang.Short">SMALLINT</SMALLINT>
<TEXT javaType="java.lang.String">LONGVARCHAR</TEXT>
<TIME isDate="true" javaType="java.sql.Time">TIME</TIME>
<TIMESTAMP isDate="true" javaType="java.sql.Timestamp">TIMESTAMP</TIMESTAMP>
<TIMETZ isDate="true" hasSize="true" javaType="java.sql.Timestamp">TIMESTAMP</TIMETZ>
<TIMESTAMPTZ isDate="true" hasSize="true" javaType="java.sql.Timestamp">TIMESTAMP</TIMESTAMPTZ>
<BPCHAR hasSize="true" javaType="java.lang.String">VARCHAR</BPCHAR>
</SQLType>
<!--
Here we map JDBC types to vendor-specific data types.
For almost all vendors, the JDBC types BIT, TINYINT, SMALLINT and BIGINT
are mapped to the data type INTEGER.
For most vendors, these types are actually INTEGER.
The following entries can be changed to impose size restrictions.
For example, to specify an actual size for a TINYINT, make the change:
Database.JDBCtype.TINYINT.Oracle="DECIMAL(4,0)"
Note that the "set" methods in the DO classes generated by DODS
do not test for size restrictions on integer values.
-->
<JDBCType>
<BIT>BIT</BIT>
<BIGINT>BIGINT</BIGINT>
<BINARY>BYTEA</BINARY>
<BLOB>BYTEA</BLOB>
<BOOLEAN>BOOLEAN</BOOLEAN>
<CHAR>CHAR</CHAR>
<CLOB>BYTEA</CLOB>
<DATE>DATE</DATE>
<DECIMAL>DECIMAL</DECIMAL>
<DOUBLE>FLOAT8</DOUBLE>
<FLOAT>FLOAT8</FLOAT>
<INTEGER>INTEGER</INTEGER>
<LONGVARBINARY>BYTEA</LONGVARBINARY>
<LONGVARCHAR>TEXT</LONGVARCHAR>
<NUMERIC>DECIMAL</NUMERIC>
<REAL>REAL</REAL>
<SMALLINT>SMALLINT</SMALLINT>
<TIME>TIME</TIME>
<TIMESTAMP>TIMESTAMP</TIMESTAMP>
<TINYINT>INT2</TINYINT>
<VARBINARY>BYTEA</VARBINARY>
<VARCHAR>TEXT</VARCHAR>
</JDBCType>
</LoaderConf>

posted on 2008-02-24 12:43 礼物 阅读(1346) 评论(0)  编辑  收藏 所属分类: postgresql

只有注册用户登录后才能发表评论。

网站导航: