伊落丹矩阵_Radio

For HSDPA in WCDMA/UMTs, UE will be assigned a number of SF16 channelization codes by the base station during fast scheduling. Assuming a theoretical effective code rate of 1.0 and 16QAM modulation, the data rate achieved by each SF16 channelization code is given by Chip rate / SF * (bits per modulation symbol) * (code rate) = 3.84M / 16 * 4 * 1.0 = 0.96 Mb/s. while the peak data rate is 0.96 * N Mb/s, where N is the number of assigned SF16 code blocks. If the UE is assigned 15 codes, which is the maximum possible number of codes since the 1 remaining SF16 or 16*SF256 channelization code resource has to be reserved for HS-SCCH, associated DPCH and downlink common control channels, the peak rate is 0.96*15=14.4 Mb/s.

So, why is the peak rate only 7.2 Mb/s for a UE, as alleged in commercials presented by China Unicom, the only WCDMA carrier in the Heaven Kingdom? The answer lies in the HS-DSCH physical layer category. Only UEs with a capability to use up to 15 codes, such as Category 9 or 10 UEs, can reach the maximum data rate of 14.4Mb/s. Best UEs available on the market are usually Category-8 UEs that can only use up to 10 codes, resulting in a peak rate of 0.96*10=9.6 Mb/s. So why is it 7.2Mb/s? By consulting 3GPP specification 25.306 (Table 5.1a), you'll find that for a UE that can use up to 10 codes, the possible HS-DSCH transport block is 14,411 bits. For a TTI of 2ms, the peak rate is 14411bits/2ms ~= 7.2 Mb/s, whose corresponding physical layer data rate is 9.6Mb/s, where the 2.4 Mb/s in difference is consumed by channel coding and other physical layer overhead.

Now we have found the answer. The 7.2Mb/s peak rate alleged by China Unicom is actually the MAC-hs throughput for Category-8 terminals.

A mathemastic explation for elastic traffic.

reciprocal

mutual

• CPCH is intended to carry packet-based user data in the uplink. The reciprocal channel providing the data in the downlink direction is the FACH.  ([Holma 2007] P. 95)

crop up

to occur or appear, esp unexpectedly

• The basic reason behind a handover crops up when the air interface connection no loger fulfills the desired criteria set for it. ([Kaaranen 2005] P.113)
  

Literature

Notes:GSM

<伊落丹> illidan.modeler [at] gmail.com
Northern Capital, Republic of Pandaren

Of the Net, by the Net, for the Net

History

In 1982, the European Conference of Postal and Telecommunications Administrations (CEPT) created the Groupe Spécial Mobile (GSM) to develop a standard for a mobile telephone system that could be used across Europe.

In 1987, a memorandum of understanding was signed by 13 countries to develop a common cellular telephone system across Europe. Finally the system created by SINTEF lead by Torleiv Maseng was selected.

In 1989, GSM responsibility was transferred to the European Telecommunications Standards Institute (ETSI) and phase I of the GSM specifications were published in 1990. The first GSM network was launched in 1991 by Radiolinja in Finland with joint technical infrastructure maintenance from Ericsson.

By the end of 1993, over a million subscribers were using GSM phone networks being operated by 70 carriers across 48 countries.

Network structure

The network behind the GSM seen by the customer is large and complicated in order to provide all of the services which are required. It is divided into a number of sections and these are each covered in separate articles.

• the Base Station Subsystem (the base stations and their controllers).
• the Network and Switching Subsystem (the part of the network most similar to a fixed network). This is sometimes also just called the core network.
• the GPRS Core Network (the optional part which allows packet based Internet connections).
• all of the elements in the system combine to produce many GSM services such as voice calls and SMS.
• 
  

Packet control unit

The packet control unit (PCU) is a late addition to the GSM standard. It performs some of the processing tasks of the BSC, but for packet data. The allocation of channels between voice and data is controlled by the base station, but once a channel is allocated to the PCU, the PCU takes full control over that channel.

The PCU can be built into the base station, built into the BSC or even, in some proposed architectures, it can be at the SGSN site. In most of the cases, the PCU is a separate node communicating extensively with the BSC on the radio side and the SGSN on the Gb side.

Physical and Logical Channels

Traffic Channels (TCHs)

Full-Rate TCH

Full-Rate Speech Channel (TCH/FS) : Carries speech digitized at a raw data rate of 13 kbps, sent at 22.8 Kbps.

Full-Rate Data Channel for 9600 bps (TCH/F9.6) : Carries data sent at 9.6 Kbps. With FEC code, the data is sent at 22.8 Kbps.

Full-Rate Data Channel for 4800 bps (TCH/F4.8) : Carries data sent at 4.8 Kbps. With FEC code, the data is sent at 22.8 Kbps.

Full-Rate Data Channel for 2400 bps (TCH/F2.4) : Carries data sent at 2.4 Kbps. With FEC code, the data is sent at 22.8 Kbps.

Half-Rate TCH

Half-Rate Speech Channel (TCH/HS) : Carries speech digitized at 6.5 Kbps, sent at 11.4 Kbps.

Half-Rate Data Channel for 4800 bps (TCH/H4.8) : Carries data sent at 4.8 Kbps. With FEC code, the data is sent at 11.4 Kbps.

Full-Rate Data Channel for 2400 bps (TCH/H2.4) : Carries data sent at 2.4 Kbps. With FEC code, the data is sent at 11.4 Kbps.

(For more details about FEC channel coding, turn to [7].)

Control Channels (CCHs)

Broadcast Channels (BCHs)

Broadcast Control Channel (BCCH) - DOWNLINK -

Frequency Correction Channel (FCCH) - DOWNLINK -

Synchronization Channel (SCH) - DOWNLINK -

Common Control Channels (CCCHs)

Paging Channel (PCH) - DOWNLINK -

Random  Access Channel (RACH) - UPLINK -

Access Grant Channel (AGCH) - DOWNLINK -

Dedicated Control Channels (DCCHs)

Stand-alone Dedicated Controls (SDCCHs) - UPLINK/DOWNLINK -

Slow Associated Control Channel (SACCH) - UPLINK/DOWNLINK -

Fast Associated Control Channel (FACCHs) - UPLINK/DOWNLINK -

BCHs

• BCCH: This channel contains system parameters needed to identify the network and gain access. These paramters include the Location Area Code (LAC), the Mobile Network Code (MNC), the frequencies of neighboring cells, and access parameters.
• FCCH: This channel is used by the MS as a frequency reference. This channel contains frequency correction bursts.
  
• SCH: This channel is used by the MS to learn the Base Station Information Code (BSIC) as well as the TDMA frame number (FN). This lets the MS know what TDMA frame they are on within the hyperframe.

CCCHs

• PCH: This channel is used to inform the MS that it has incoming traffic. The traffic could be a voice call, SMS, or some other form of traffic.
• RACH: This channel is used by a MS to request an initial dedicated channel from the BTS. This would be the first transmission made by a MS to access the network and request radio resources. The MS sends an  Access Burst on this channel in order to request access
• AGCH: This channel is used by a BTS to notify the MS of the assignement of an initial SDCCH for initial signaling.

DCCHs

• SDCCH: This channel is used for signalling and call setup between the MS and the BTS.
• SACCH: This channel is a continuous stream channel that is used for control and supervisory signals associated with the traffic channels.
• FACCH: This channel is used for control requirements such as handoffs. There is no TS and frame allocation dedicated to a FAACH. The FAACH is a burst-stealing channel, it steals a Timeslot from a TCH.

Frame Structure

For a frame for traffic channe, a super frame consists of 51 multiframe that is made of 26 TDMA frames. For a frame for control channel, a super frame consists of 26 multiframe that contains 51 TDMA frames. Each TDMA frame spans 4.615 ms, consisting of 8 time slots, during each of which a user sends data called "burst". Of a normal burst, the payload (information-bearing part) occupies two 57 bit blocks.

 

1. [web] "GSM." Wikipedia, The Free Encyclopedia. 16 Apr 2009, 16:20 UTC. 18 Apr 2009 <http://en.wikipedia.org/w/index.php?title=GSM&oldid=284232567>
2. [web] "Base Station subsystem." Wikipedia, The Free Encyclopedia. 30 Mar 2009, 19:49 UTC. 20 Apr 2009 <http://en.wikipedia.org/w/index.php?title=Base_Station_subsystem&oldid=280712891>
3. [book] [Rappaport 2001] Section 11.3 "Global System for Mobile"
4. [book] [Tanenbaum 2004] Sec. 2.6.2 "Second-Generation Mobile Phones: Digital Voice"
5. [web] "GSM Network Architecture". 29 Apr 2009. <http://www.gsmfordummies.com/architecture/arch.shtml >
6. [web] "Logical Channels". 29 Apr 2009. <http://www.gsmfordummies.com/tdma/logical.shtml >
7. [book] [Steele 2001] Sec. 2.3.9 "Speech transmission"