posts - 297,  comments - 1618,  trackbacks - 0
 

1.   SIPp概述

1.1 介绍

 SIPp是一个测试SIP协议性能的工具软件。这是一个GPL的开放源码软件。 
     它包含了一些基本的SipStone用户代理工作流程(UACUAS),并可使用INVITEB YE建立和释放多个呼叫。它也可以读XML的场景文件,即描述任何性能测试的配置文件。它能动态显示测试运行的统计数据(呼叫速率、信号来回的延迟,以及 消息统计)。周期性地把CSV统计数据转储,在多个套接字上的TCPUDP,利用重新传输管理的多路复用。在场景定义文件中可以使用正规表达式,动态调 整呼叫速率。
    SIPp可以用来测试许多真实的SIP设备,如SIP代理,B2BUAs,SIP媒体服务器,SIP/x网关,SIP PBX,等等,它也可以模仿上千个SIP代理呼叫你的SIP系统。

    关于SIPpgoogle上搜索到很多,可是关于SIPp的中文说明资料较少,或者很多都是不齐全的安装使用说明。

SIPp的网址:http://sipp.sourceforge.net/

1.2 用途

SIPp一般来进行AS的压力测试,图示如下:

UAC(发起端,主叫)--------------------AS---------------------UAS(接收端,被叫)

其中UACUAS都有SIPp来担任。因此可以由它来控制每秒有多少个caps,也可由它来控制一个呼叫持续多长时间等。

2. 安装

2.1 Windows版安装

很简单,省略。

3. SIPp的使用

3.1 运行SIPp

       选择“程序”->”Sipp_3.1”->Start sipp”,运行界面如下所示:
  

       在命令行运行:sipp,出现帮助信息,如下所示:

                 the scenarios.

                      First line of this file say whether the data is to be

                      read in sequence (SEQUENTIAL), random (RANDOM), or user

                      (USER) order.

                      Each line corresponds to one call and has one or more

                      ';' delimited data fields. Those fields can be referred

                      as [field0], [field1],  in the xml scenario file.

                      Several CSV files can be used simultaneously (syntax:

                      -inf f1.csv -inf f2.csv )

   -infindex        : file field

                      Create an index of file using field. For example -inf

                      users.csv -infindex users.csv 0 creates an index on the

                      first key.

   -ip_field        : Set which field from the injection file contains the IP

                      address from which the client will send its messages.

                      If this option is omitted and the '-t ui' option is

                      present, then field 0 is assumed.

                      Use this option together with '-t ui'

   -l               : Set the maximum number of simultaneous calls. Once this

                      limit is reached, traffic is decreased until the number

                      of open calls goes down. Default:

                        (3 * call_duration (s) * rate).

   -lost            : Set the number of packets to lose by default (scenario

                      specifications override this value).

   -m               : Stop the test and exit when 'calls' calls are processed

   -mi              : Set the local media IP address (default: local primary

                      host IP address)

   -master          : 3pcc extended mode: indicates the master number

   -max_recv_loops : Set the maximum number of messages received read per

                      cycle. Increase this value for high traffic level. The

                      default value is 1000.

   -max_sched_loops : Set the maximum number of calsl run per event loop.

                      Increase this value for high traffic level. The default

                      value is 1000.

   -max_reconnect   : Set the the maximum number of reconnection.

 

   -max_retrans     : Maximum number of UDP retransmissions before call ends on

                      timeout. Default is 5 for INVITE transactions and 7 for

                      others.

   -max_invite_retrans: Maximum number of UDP retransmissions for invite

                      transactions before call ends on timeout.

   -max_non_invite_retrans: Maximum number of UDP retransmissions for non-invite

                      transactions before call ends on timeout.

   -max_log_size    : What is the limit for error and message log file sizes.

 

   -max_socket      : Set the max number of sockets to open simultaneously.

                      This option is significant if you use one socket per

                      call. Once this limit is reached, traffic is distributed

                      over the sockets already opened. Default value is 50000

  -mb              : Set the RTP echo buffer size (default: 2048).

   -mp              : Set the local RTP echo port number. Default is 6000.

   -nd              : No Default. Disable all default behavior of SIPp which

                      are the following:

                      - On UDP retransmission timeout, abort the call by

                        sending a BYE or a CANCEL

                      - On receive timeout with no ontimeout attribute, abort

                        the call by sending a BYE or a CANCEL

                      - On unexpected BYE send a 200 OK and close the call

                      - On unexpected CANCEL send a 200 OK and close the call

                      - On unexpected PING send a 200 OK and continue the call

                      - On any other unexpected message, abort the call by

                        sending a BYE or a CANCEL

   -nr              : Disable retransmission in UDP mode.

   -nostdin         : Disable stdin.

   -p               : Set the local port number.  Default is a random free port

                      chosen by the system.

   -pause_msg_ign   : Ignore the messages received during a pause defined in

                      the scenario

   -periodic_rtd    : Reset response time partition counters each logging

                      interval.

   -r               : Set the call rate (in calls per seconds). This value can

                      bechanged during test by pressing '+','_','*' or '/'.

                      Default is 10.

                      pressing '+' key to increase call rate by 1 *

                      rate_scale,

                      pressing '-' key to decrease call rate by 1 *

                      rate_scale,

                      pressing '*' key to increase call rate by 10 *

                      rate_scale,

                      pressing '/' key to decrease call rate by 10 *

                      rate_scale.

                      If the -rp option is used, the call rate is calculated

                      with the period in ms given by the user.

   -rp              : Specify the rate period for the call rate. Default is 1

                      second and default unit is milliseconds. This allows

                      you to have n calls every m milliseconds (by using -r n

                      -rp m).

                      Example: -r 7 -rp 2000 ==> 7 calls every 2 seconds.

                               -r 10 -rp 5s => 10 calls every 5 seconds.

 

   -rate_scale      : Control the units for the '+', '-', '*', and '/' keys.

 

   -rate_increase   : Specify the rate increase every -fd units (default is

                      seconds). This allows you to increase the load for each

                      independent logging period.

                      Example: -rate_increase 10 -fd 10s

                        ==> increase calls by 10 every 10 seconds.

   -rate_max        : If -rate_increase is set, then quit after the rate

                      reaches this value.

                      Example: -rate_increase 10 -rate_max 100

                        ==> increase calls by 10 until 100 cps is hit.

   -no_rate_quit    : If -rate_increase is set, do not quit after the rate

                      reaches -rate_max.

   -recv_timeout    : Global receive timeout. Default unit is milliseconds. If

                      the expected message is not received, the call times out

                      and is aborted.

   -send_timeout    : Global send timeout. Default unit is milliseconds. If a

                      message is not sent (due to congestion), the call times

                      out and is aborted.

   -reconnect_close : Should calls be closed on reconnect?

   -reconnect_sleep : How long (in milliseconds) to sleep between the close and

                      reconnect?

   -ringbuffer_files: How many error/message files should be kept after

                      rotation?

   -ringbuffer_size : How large should error/message files be before they get

                      rotated?

   -rsa             : Set the remote sending address to host:port for sending

                      the messages.

   -rtp_echo        : Enable RTP echo. RTP/UDP packets received on port defined

                      by -mp are echoed to their sender.

                      RTP/UDP packets coming on this port + 2 are also echoed

                      to their sender (used for sound and video echo).

   -rtt_freq        : freq is mandatory. Dump response times every freq calls

                      in the log file defined by -trace_rtt. Default value is

                      200.

   -s               : Set the username part of the resquest URI. Default is

                      'service'.

   -sd              : Dumps a default scenario (embeded in the sipp executable)

   -sf              : Loads an alternate xml scenario file. To learn more

                      about XML scenario syntax, use the -sd option to dump

                      embedded scenarios. They contain all the necessary help.

   -oocsf           : Load out-of-call scenario.

 

   -oocsn           : Load out-of-call scenario.

   -skip_rlimit     : Do not perform rlimit tuning of file descriptor limits.

                      Default: false.

   -slave           : 3pcc extended mode: indicates the slave number

   -slave_cfg       : 3pcc extended mode: indicates the file where the master

                      and slave addresses are stored

   -sn              : Use a default scenario (embedded in the sipp executable).

                      If this option is omitted, the Standard SipStone UAC

                      scenario is loaded.

                      Available values in this version:

                      - 'uac'      : Standard SipStone UAC (default).

                      - 'uas'      : Simple UAS responder.

                      - 'regexp'   : Standard SipStone UAC - with regexp and

                        variables.

                      - 'branchc' : Branching and conditional branching in

                        scenarios - client.

                      - 'branchs' : Branching and conditional branching in

                        scenarios - server.

                      Default 3pcc scenarios (see -3pcc option):

 

                      - '3pcc-C-A' : Controller A side (must be started after

                        all other 3pcc scenarios)

                      - '3pcc-C-B' : Controller B side.

                      - '3pcc-A'   : A side.

                      - '3pcc-B'   : B side.

   -stat_delimiter : Set the delimiter for the statistics file

   -stf             : Set the file name to use to dump statistics

   -t               : Set the transport mode:

                      - u1: UDP with one socket (default),

                      - un: UDP with one socket per call,

                      - ui: UDP with one socket per IP address The IP

                        addresses must be defined in the injection file.

                      - t1: TCP with one socket,

                      - tn: TCP with one socket per call,

                      - l1: TLS with one socket,

                      - ln: TLS with one socket per call,

                      - c1: u1 + compression (only if compression plugin

                        loaded),

                      - cn: un + compression (only if compression plugin

                        loaded). This plugin is not provided with sipp.

3.2 使用SIPp进行压力测试

3.2.1启动服务端

       首先查知本机的IP,例如笔者本机的IP192.168.2.45。在SIPp的运行窗口运行:

sipp -sn uas -i 192.168.2.45     -p 5060

       出现的命令窗口的内容类似如下:
    

3.2.2启动和运行客户端

       再开启一个SIPp界面。

启动客户端使用:sipp -sn uac….,使用如下:

sipp -sn uac -m 1 -i 192.168.2.45 -p 6060 -s 01012345678 192.168.2.154

      启动后命令窗口如下所示:
   

其中:

       -m:该参数表示每秒的caps数,若没写该参数,默认为每秒10caps

       -i:这个用于指定本机的ip,若本机只有一个ip,可以不指定,若有多个IP,需要指定该参数;

       -p:指定本机的端口,可以不指定;

       -s:该参数用于指定要呼叫的电话号码;

       192.168.1.154ASIP地址,没有指定端口时,默认指向的端口为5060

       注意:因为UACUAS都在笔者机器,IP:192.168.2.45,因此AS端还需要对应配置,将落地等的IP地址等都指向该IP。对于我们的环境来说,需要配置SCFconfig.as.ACD文件,修改成:
  

       笔者修改了ss1IP为:192.168.2.45.

       在使用uac前,可使用SIP软终端来测试下是不是呼叫后落地是不是落在本机。

3.2.3查看运行结果

       在运行:

sipp -sn uac -i 192.168.2.45 -p 6060 -s 01012345678 192.168.2.154

   后(该句为10caps),可查看UASUAC的界面,服务端的界面类似如下所示:
   

       UAC端的界面类似如下所示:
   

       因为笔者的AS没有发183的流程,所以它的次数是为0的,后续章节还会说到如果不是SIPp的参考流程时该怎么做。

3.2.4查看AS所在的Linux机器的性能情况

1inmon

       公司的SCF提供inmon来查看自动机挂接等的情况,如下所示:
   

       其中FSMS表示当前挂着的自动机数,是需要关注的项。

2vmstat

vmstat 命令报告关于内核线程、虚拟内存、磁盘、陷阱和 CPU 活动的统计信息。由 vmstat 命令生成的报告可以用于平衡系统负载活动。系统范围内的这些统计信息(所有的处理器中)都计算出以百分比表示的平均值,或者计算其总和。

例如笔者使用:

vmstat 3

表示每隔3s显示内核线程、虚拟内存、磁盘、陷阱和 CPU 活动的统计信息。界面如下所示:
   

       重点要关注的项是iocpu等信息。

3top

top命令提供了实时的对系统处理器的状态监视。它将显示系统中CPU敏感的任务列表。

运行top命令后,AS所在Linux机器的显示效果如下:
   

因为应用主要为ccmysql,所以要重点关注这两者是否稳定。

主要关注的项是VIRTRES,如果这两者一直增加,那很可能程序或其它地方存在内存泄露。

3.2.5其它

UAC端运行的过程中:

1) 按“+”键表示在当前caps的基础中加1

2) 按“-”键表示在当前caps的基础中减1

3) 按“*”键表示在当前caps的基础中+运行起点的caps,例如10caps,按“*”后,变成20,再按“*”变成30.

posted on 2009-09-11 13:45 阿蜜果 阅读(15095) 评论(7)  编辑  收藏 所属分类: 协议


FeedBack:
# re: 蜜果私塾:使用SIPP来进行SIP压力测试(一)
2012-06-25 22:44 | SIP爱好者
建议使用kylinPET性能测试工具,比SIPp好用多,支持图形化编辑业务流程,支持多种并发模型,支持发送与输出媒体流指标。  回复  更多评论
  
# re: 蜜果私塾:使用SIPP来进行SIP压力测试(一)
2013-05-13 10:00 | 程序
sipp
window版本去那里下载  回复  更多评论
  
# re: 蜜果私塾:使用SIPP来进行SIP压力测试(一)
2013-08-26 14:25 | luoriver
@程序
sipp官网http://sourceforge.net/projects/sipp/
欢迎加入SIP 测试人员交流群:323827101,群里可能有你需要关于SIP协议的相关资料  回复  更多评论
  
# re: 蜜果私塾:使用SIPP来进行SIP压力测试(一)
2013-08-26 14:36 | luoriver
-oocsf : Load out-of-call scenario.
-oocsn : Load out-of-call scenario.

请问这两项是什么意思啊,我QQ:402007353,谢谢!  回复  更多评论
  
# re: 蜜果私塾:使用SIPP来进行SIP压力测试(一)
2013-10-16 11:23 | baoling
需要配置SCF的config.as.ACD文件
在哪儿配置,求步骤  回复  更多评论
  
# re: 蜜果私塾:使用SIPP来进行SIP压力测试(一)
2013-11-22 21:28 | Arthas
kylinPET性能太差了,并发都上不去,而且界面不够友好@SIP爱好者
  回复  更多评论
  
# re: 蜜果私塾:使用SIPP来进行SIP压力测试(一)
2014-03-07 15:12 | jishu
请问为什么打命令都提示“不是内部或外部命令”  回复  更多评论
  

只有注册用户登录后才能发表评论。


网站导航:
 
<2009年9月>
303112345
6789101112
13141516171819
20212223242526
27282930123
45678910

      生活将我们磨圆,是为了让我们滚得更远——“圆”来如此。
      我的作品:
      玩转Axure RP  (2015年12月出版)
      

      Power Designer系统分析与建模实战  (2015年7月出版)
      
     Struts2+Hibernate3+Spring2   (2010年5月出版)
     

留言簿(262)

随笔分类

随笔档案

文章分类

相册

关注blog

积分与排名

  • 积分 - 2279401
  • 排名 - 3

最新评论

阅读排行榜

评论排行榜