OpenSessionInView详解(面试时常会问到的问题)

OpenSessionInViewFilter是Spring提供的一个针对Hibernate的一个支持类,其主要意思是在发起一个页面请求时打开Hibernate的Session,一直保持这个Session,直到这个请求结束,具体是通过一个Filter来实现的。

由于Hibernate引入了Lazy Load特性,使得脱离Hibernate的Session周期的对象如果再想通过getter方法取到其关联对象的值,Hibernate会抛出一个LazyLoad的Exception。所以为了解决这个问题,Spring引入了这个Filter,使得Hibernate的Session的生命周期变长。

首先分析一下它的源码,可以发现,它所实现的功能其实比较简单:
Java代码

   1. SessionFactory sessionFactory = lookupSessionFactory(request); 
   
2. Session session = null
   
3boolean participate = false
   
4.  
   
5if (isSingleSession()) { 
   
6.     // single session mode 
   7.     if (TransactionSynchronizationManager.hasResource(sessionFactory)) { 
   
8.     // Do not modify the Session: just set the participate flag. 
   9.     participate = true
  
10.        }    else { 
  
11.     logger.debug("Opening single Hibernate Session in OpenSessionInViewFilter"); 
  
12.     session = getSession(sessionFactory); 
  
13.     TransactionSynchronizationManager.bindResource(sessionFactory, new SessionHolder(session)); 
  
14.     } 
  
15. } else { 
  
16.     // deferred close mode 
  17.     if (SessionFactoryUtils.isDeferredCloseActive(sessionFactory)) { 
  
18// Do not modify deferred close: just set the participate flag. 
  19.     participate = true
  
20.     } else { 
  
21.     SessionFactoryUtils.initDeferredClose(sessionFactory); 
  
22.     } 
  
23. } 
  
24.  
  
25try { 
  
26.     filterChain.doFilter(request, response); 
  
27. } finally { 
  
28.     if (!participate) { 
  
29.             if (isSingleSession()) { 
  
30.                 // single session mode 
  31.         TransactionSynchronizationManager.unbindResource(sessionFactory); 
  
32.         logger.debug("Closing single Hibernate Session in OpenSessionInViewFilter"); 
  
33.         closeSession(session, sessionFactory); 
  
34.     }else { 
  
35.         // deferred close mode 
  36.         SessionFactoryUtils.processDeferredClose(sessionFactory); 
  
37.     } 
  
38. } 
  
39. } 



 1 SessionFactory sessionFactory = lookupSessionFactory(request);
 2 Session session = null;
 3 boolean participate = false;
 4 
 5 if (isSingleSession()) {
 6     // single session mode
 7     if (TransactionSynchronizationManager.hasResource(sessionFactory)) {
 8     // Do not modify the Session: just set the participate flag.
 9     participate = true;
10        }    else {
11     logger.debug("Opening single Hibernate Session in OpenSessionInViewFilter");
12     session = getSession(sessionFactory);
13     TransactionSynchronizationManager.bindResource(sessionFactory, new SessionHolder(session));
14     }
15 else {
16     // deferred close mode
17     if (SessionFactoryUtils.isDeferredCloseActive(sessionFactory)) {
18 // Do not modify deferred close: just set the participate flag.
19     participate = true;
20     } else {
21     SessionFactoryUtils.initDeferredClose(sessionFactory);
22     }
23 }
24 
25 try {
26     filterChain.doFilter(request, response);
27 finally {
28     if (!participate) {
29                if (isSingleSession()) {
30                  // single session mode
31         TransactionSynchronizationManager.unbindResource(sessionFactory);
32         logger.debug("Closing single Hibernate Session in OpenSessionInViewFilter");
33         closeSession(session, sessionFactory);
34     }else {
35         // deferred close mode
36         SessionFactoryUtils.processDeferredClose(sessionFactory);
37     }
38 }
39 }


在上述代码中,首先获得SessionFactory,然后通过SessionFactory获得一个Session。然后执行真正的Action代码,最后根据情况将Hibernate的Session进行关闭。整个思路比较清晰。

注意,在这里有个2个Tips:
1)通过getSession()获得的这个Session做了一次
session.setFlushMode(FlushMode.NEVER); 有关FlushMode可以参考一下这篇文章。http://www2.matrix.org.cn/resource/article/2006-10-08/Hibernate+FlushMode+NEVER_312bca85-5699-11db-91a0-d98dff0aec60.html
2)Spring对拿到的Session做了一次绑定到当前线程的做法,使得这个Session是线程安全的。

从上述代码其实可以得到一些对我们的开发有帮助的结论:
1)如果使用了OpenSessionInView模式,那么Spring会帮助你管理Session的开和关,从而你在你的DAO中通过HibernateDaoSupport拿到的getSession()方法,都是绑定到当前线程的线程安全的Session,即拿即用,最后会由Filter统一关闭。
2)由于拿到的Hibernate的Session被设置了session.setFlushMode(FlushMode.NEVER); 所以,除非你直接调用session.flush(),否则Hibernate session无论何时也不会flush任何的状态变化到数据库。因此,数据库事务的配置非常重要。(我们知道,在调用org.hibernate.Transaction.commit()的时候会触发session.flush())我曾经见过很多人在使用OpenSessionInView模式时,都因为没有正确配置事务,导致了底层会抛出有关FlushMode.NEVER的异常。

OpenSessionInView这个模式使用比较简单,也成为了大家在Web开发中经常使用的方法,不过它有时候会带来一些意想不到的问题,这也是在开发中需要注意的。
1. 在Struts+Spring+Hibernate环境中,由于配置的问题导致的模式失效
这个问题以前论坛曾经讨论过,可以参考一下下面这个帖子:
http://www.javaeye.com/topic/15057

2. OpenSessionInView的效率问题
这个问题也有人在论坛提出过,Robbin曾经做过具体的测试,可以具体参考一下下面这个帖子:
http://www.javaeye.com/topic/17501

3. 由于使用了OpenSessionInView模式后造成了内存和数据库连接问题
这个问题是我在生产环境中碰到的一个问题。由于使用了OpenSessionInView模式,Session的生命周期变得非常长。虽然解决了Lazy Load的问题,但是带来的问题就是Hibernate的一级缓存,也就是Session级别的缓存的生命周期会变得非常长,那么如果你在你的Service层做大批量的数据操作时,其实这些数据会在缓存中保留一份,这是非常耗费内存的。还有一个数据库连接的问题,存在的原因在于由于数据库的Connection是和Session绑在一起的,所以,Connection也会得不到及时的释放。因而当系统出现业务非常繁忙,而计算量又非常大的时候,往往数据连接池的连接数会不够。这个问题我至今非常头痛,因为有很多客户对数据连接池的数量会有限制,不会给你无限制的增加下去。

4. 使用了OpenSessionInView模式以后取数据的事务问题
在使用了OpenSessionInView以后,其实事务的生命周期比Session的生命周期来得短,就以为着,其实有相当一部分的查询是不被纳入到事务的范围内的,此时是否会读到脏数据?这个问题我至今不敢确认,有经验的朋友请指教一下。

最后提一下OpenSessionInView模式的一些替代方案,可以使用OpenSessionInViewInterceptor来代替这个Filter,此时可以使用Spring的AOP配置,将这个Interceptor配置到你所需要的层次上去。另外就是只能使用最古老的Hibernate.initialize()方法进行初始化了。

posted on 2009-11-24 11:13 MichaelLee 阅读(547) 评论(0)  编辑  收藏 所属分类: Spring


只有注册用户登录后才能发表评论。


网站导航:
 
<2009年11月>
25262728293031
1234567
891011121314
15161718192021
22232425262728
293012345

导航

统计

公告

====Michael Lee====
=Java Sofware Engineer=
=Work @ Beijing=
---再烦,也别忘微笑;再急,也要注意语气;再苦,也别忘坚持;再累,也要爱自己!---
---低调做人,你会一次比一次稳健;高调做事,你会一次比一次优秀---
---成功的时候不要忘记过去;失败的时候不要忘记还有未来---

常用链接

留言簿(2)

随笔分类

随笔档案

文章分类

文章档案

搜索

最新评论

阅读排行榜

评论排行榜