先给大家展示一下我们的火辣热裤，让你的夏天火辣一夏。

M-Angel，做中国最时尚的女性购物网站！

地址：http://m-angel.com

我看到过的最漂亮的购物网站，以后会大火特火的。不信就等着看吧。

The '*' character is used to specify all values. For example, "*" in the minute field means "every minute".

The '?' character is allowed for the day-of-month and day-of-week fields. It is used to specify 'no specific value'. This is useful when you need to specify something in one of the two fileds, but not the other. See the examples below for clarification.

The '-' character is used to specify ranges For example "10-12" in the hour field means "the hours 10, 11 and 12".

The ',' character is used to specify additional values. For example "MON,WED,FRI" in the day-of-week field means "the days Monday, Wednesday, and Friday".

The '/' character is used to specify increments. For example "0/15" in the seconds field means "the seconds 0, 15, 30, and 45". And "5/15" in the seconds field means "the seconds 5, 20, 35, and 50". You can also specify '/' after the '*' character - in this case '*' is equivalent to having '0' before the '/'.

The 'L' character is allowed for the day-of-month and day-of-week fields. This character is short-hand for "last", but it has different meaning in each of the two fields. For example, the value "L" in the day-of-month field means "the last day of the month" - day 31 for January, day 28 for February on non-leap years. If used in the day-of-week field by itself, it simply means "7" or "SAT". But if used in the day-of-week field after another value, it means "the last xxx day of the month" - for example "6L" means "the last friday of the month". When using the 'L' option, it is important not to specify lists, or ranges of values, as you'll get confusing results.

The 'W' character is allowed for the day-of-month field. This character is used to specify the weekday (Monday-Friday) nearest the given day. As an example, if you were to specify "15W" as the value for the day-of-month field, the meaning is: "the nearest weekday to the 15th of the month". So if the 15th is a Saturday, the trigger will fire on Friday the 14th. If the 15th is a Sunday, the trigger will fire on Monday the 16th. If the 15th is a Tuesday, then it will fire on Tuesday the 15th. However if you specify "1W" as the value for day-of-month, and the 1st is a Saturday, the trigger will fire on Monday the 3rd, as it will not 'jump' over the boundary of a month's days. The 'W' character can only be specified when the day-of-month is a single day, not a range or list of days.

The 'L' and 'W' characters can also be combined for the day-of-month expression to yield 'LW', which translates to "last weekday of the month".

The '#' character is allowed for the day-of-week field. This character is used to specify "the nth" XXX day of the month. For example, the value of "6#3" in the day-of-week field means the third Friday of the month (day 6 = Friday and "#3" = the 3rd one in the month). Other examples: "2#1" = the first Monday of the month and "4#5" = the fifth Wednesday of the month. Note that if you specify "#5" and there is not 5 of the given day-of-week in the month, then no firing will occur that month.

The 'C' character is allowed for the day-of-month and day-of-week fields. This character is short-hand for "calendar". This means values are calculated against the associated calendar, if any. If no calendar is associated, then it is equivalent to having an all-inclusive calendar. A value of "5C" in the day-of-month field means "the first day included by the calendar on or after the 5th". A value of "1C" in the day-of-week field means "the first day included by the calendar on or after sunday".

The legal characters and the names of months and days of the week are not case sensitive.

Here are some full examples:

Pay attention to the effects of '?' and '*' in the day-of-week and day-of-month fields!

NOTES:

• Support for the features described for the 'C' character is not complete.
• Support for specifying both a day-of-week and a day-of-month value is not complete (you'll need to use the '?' character in on of these fields).
• Be careful when setting fire times between mid-night and 1:00 AM - "daylight savings" can cause a skip or a repeat depending on whether the time moves back or jumps forward.

网址：http://antelope.tigris.org/

我用到过一个控制时间的标签

2。ant-contrib

网址：ant-contrib.sourceforge.net

我用到过<if><else><then>等逻辑标签。

下面是我写的一个ant片断，用来copy不存在的文件，如果存在，则询问是否覆盖。
 <!--  tasks for copy required system files -->

 <taskdef resource="net/sf/antcontrib/antcontrib.properties" classpath="../WEB-INF/lib/ant-contrib-1.0b2.jar" />

 <target name="deploySysFiles">
  <var name="targetFile" unset="true" />
  <property name="targetFile" value="${JavaStatusSchemePath}" />
  <var name="originalFile" unset="true"/>
  <property name="originalFile" value="${JavaStatusSchemePath-Original}"/>
  <antcall target="deploySysFile" />
 </target>

 <target name="deploySysFile">
  <echo>check file : ${targetFile} exist or not</echo>
  <available file="${targetFile}" property="targetFileExisting" />
  <if>
   <not>
    <isset property="targetFileExisting" />
   </not>
   <then>
    <antcall target="copyTargetFile" />
   </then>
   <elseif>
    <isset property="targetFileExisting" />
    <then>
     <antcall target="overrideTargetFile" />
    </then>
   </elseif>
  </if>
  <echo>deploy system files over</echo>
 </target>

 <target name="overrideTargetFile">
  <limit seconds="${timeoutSecond}">
   <input validargs="y,n" addproperty="answer" defaultvalue="n" message="file '${targetFile}' already existed,do you want to override?" />
  </limit>
  <condition property="override">
   <equals arg1="y" arg2="${answer}" />
  </condition>
  <if>
   <isset property="override" />
   <then>
    <echo>override the file...</echo>
    <copy tofile="${targetFile}" file="${originalFile}" overwrite="true" encoding="ms932" />
   </then>
  </if>
 </target>
 <target name="copyTargetFile">
  <echo>file ${targetFile} dose not existed,deploying this file</echo>
  <copy file="${originalFile}" tofile="${targetFile}" encoding="ms932" />
 </target>
 <!-- end copy system files. -->

奇客网 http://diglog.com/ （推荐）
奇客发现 有趣新鲜

窝窝网 http://www.mywowo.com/ 
用Digg+点评方式来介绍web2.0的网站

板儿砖 http://www.banerzhuan.com/
相当有创意的digg式网站。

新聚网 http://www.tagriver.com/ 
博客时代的新型交流

顶啊网 http://www.dingr.com/ 
关于科技的头版新闻

抓虾网 http://www.zhuaxia.com/ 
集rss订阅和digg挖掘为一体。

比客窝http://www.pkooo.com/
以资讯为主的PK新闻

电影发现 http://www.new21.cn/ 
电影发现·分享

爱发现 http://www.ifaxian.com/ 
依靠社区的力量找出网上有阅读价值的内容

新热网 http://www.newhots.com/ 
针对技术，BT资源，娱乐的网摘网站

教育资源挖掘 http://www.edudig.net/ 
发掘互联网上有价值的教育资源

17DIG网 http://www.17dig.com/ 
发掘IT新闻，草根们的新闻

中国掘客 http://www.cndigg.com/ 
完全是digg.com的中文版

vottie 熱門影片
http://www.vottie.com/
短片、熱門影片

发掘之狐
http://www.diggfox.com/
发掘之狐

livedigg|digg直播 
http://www.livedigg.com/
发掘网络上的新东西

奇乐无穷 
http://www.qlwq.com/
web2.0留学社区，Digg贴吧模式,国内首创!

Buzzc
http://www.buzzc.com/
汇集网络最热门

Web2.0网站集合

http://www.web2list.cn/

开始->运行->“RunDll32 advpack.dll,LaunchINFSection %windir%\INF\msmsgs.inf,BLC.Remove”回车即可。

试试看，效果如何？

删除Windows强加的附件：
1） 用记事本NOTEPAD修改\winnt\inf\sysoc.inf，用查找/替换功能，在查找框中输入，hide（一个英文逗号紧跟hide），将“替换为”框设为空。并选全部替换，这样，就把所有的,hide都去掉了，
2） 存盘退出，
3）再运行“添加-删除程序”，就会看见“添加/删除 Windows 组件”中多出了好几个选项；这样你可以删除好些没有用的附件